Question about Washing Machines

1 Answer

Whirlpool front loading washing machine

Door open light keeps comeiong on ans stoping the machine

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

It is probably either the post that engages the switch is broken or out of alignment or the switch is knocked out of whack or is broken. Check it by inserting a small flathead in the slot and push in while the unit is on spin cycle (unless you want a mess to clean up) and see if it works then.

Posted on Jan 28, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch washing machine logi xx7 no power cant open door. fuse ok


Check power at outlet and make sure you are getting power to the machine. If you are then the board on the machine may have had a surge and burned out

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

Sep 25, 2016 | Bosch Washing Machines

2 Answers

My indiset washing machine says f06 and all lights r flashing an door wont open it had already stoped an then done this


the fault is that the pump isnt emptying the water fro the drum, its possibly blocked with a coin or some such, open the bottom front panel, some have just a little door about 4 inch square, others you have to remove the little panel at the base which runs along the front. Then open the pump, it looks like a knob about 2.5inch in diametre, unscrew it and pull it out, it may take a bit of jiggling. Bewqre as all of the wster in the drum will flow out of here so you need to catch it, i usually use a large black ssck and let it in to it, clean the cover and put it back in. power off your machine for a fee minutes and then power it back on again and this should solve your problem

Feb 02, 2015 | Washing Machines

1 Answer

My whirpool locked light keeps flashing and wont wash


Hi


The light is flashing due to the door lock error. The door lock is activated as the machine experienced an error or was stopped in middle of a cycle. Or the door was being pulled while the machine was running a cycle. Try unplugging your washer and restart the washer to check if you are still getting the same blinking light. If error is still not resolved then start the rinse/spin cycle & stop the cycle, now press and hold the cancel button for 5-10 seconds. However, if you are still not able to get the door open then you'll need to open the door manually by disassembling the washer.
Hope this helps... Please post back for any further assistance.


Daniel

Apr 18, 2011 | Washing Machines

1 Answer

Our Kemore fridge stoped making ice. water is coming.. It has infra red light control for ice maker to stop when bucket full of ice.


Open up the door ,hold in the bracket that is on the side(usually lrft side) and if the sensor light keeps blinking,it has to be replaced.HOpe this helps if so give us a 4 thumbs up. THANKS

Mar 03, 2011 | Kenmore 53642 / 53644 Side by Side...

1 Answer

Machine Stoped at the begining of spin cycle


The door switch or its actuator is not making contact. This is assuming that the other cycles work properly. Basically it thinks the door is open and it will not spin.

Jul 08, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Copier Machine stoped to print and copy


Open the right side door and check the transfer/separation corona unit. It may be a broken corona wire, and make sure corona unit is sitting properly.

Jun 04, 2008 | Toshiba e-Studio 350 Copier

1 Answer

Machine is locked


to open your door make sure all the water is out of your drum if not get the outlet hose and place on the floor into a bucket if water comes out than your pump is either blocked/faulty

Aug 12, 2007 | Bosch Logixx WFT 2806 Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...