Question about Ricoh Aficio 2027 All-In-One Laser Printer
Help Please! Printer won't work because of this error - can anyone shed some light on how to fix it. THis is quite an urgent issue. Thanks to anyone who can shed some light.
Hi, i recently got this error on Ricoh Aficio AP 610N
and This was the Fix..
0.- Hold on your breathe...
1.- Turn Off the printer.
2.- Press "ONLINE and SCAPE" buttons..
3.- without stopping pressing them (ONLINE and SCAPE) TURN ON THE PRINTER.. and wait about 10-15 seconds and Service menu show up.. after this.. release the buttons...
4.- Go to.. Engine Maintenance... Enter..
5.- Search for SP5810 (Fusing err clr) and Enter.
6.- Accept the change and enter...
7.- Turn off the printer...
8.- Finally turn on the printer and try to print something :)
9.- if the printer works.. you can breathe again :)
Thanks to everybody..
Posted on May 21, 2008
HI there the following is taken from the service manual best to install new fuser unit.
545 A Fusing lamp stays on
The fusing lamp stays on more than 12
seconds after the main motor has been
• Fusing thermistor defective
• Power supply board defective
• Defective connection of the
The most common thing is that the fuser thermistor is dirty and stays on trying to obtain the correct temp.
Posted on Jan 28, 2008
Infiernet's solution worked like a charm! thanks so much!
Posted on Sep 07, 2009
Thanks.. I installed a NEW fuser main kit and still had the sc542 error.. and I rested this value and it is working again..
Posted on Nov 19, 2012
A melhor coisa, é deixa pra lá, não esquenta a cabeça, deixa a fritura pro fusor ... liga pro técnico de deixa esta impressora de lado ...
Posted on May 14, 2011
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: