When we watch a dvd on the dvd player hooked up to the vision tv the picture is black and white only. Why?

My DVD player only plays in black and white - TOSHIBA FORUMS

forums.toshiba.com/.../My-DVD-player...plays-in-black-and-white/.../47...

39L1350U) and am trying to hook up the DVD player. ... My DVD player only plays in black and white ... My DVD player is an old Sony. .... Was using and S-Video connecting cable to the TV. ... suggested to use VIDEO instead of COLOR STREAM, I changed that in the TV menu, plug the red and while at the back of TV where ...

No Color When My DVD Player Is Hooked Up - Community ...

community.insigniaproducts.com/...DVD-Players/...Color...My-DVD-Pla...

Jul 14, 2014 - I hooked up my DVD player and I have no color. ... you need to use the connections on the left side of the TV or on connections on the back. .... is turned on, which can cause this black and white image issue you're having. ... If the Player shows correctly on a different TV with the same hook up, and different ...

The picture from a disc player displays on the TV in black ...

Check the DVD player to see if it is a PAL or NTSC player. A PAL player will give a black and white picture on a NTSC TV

Hook the DVD to another TV set, this will prove if the player is the issue or original TV

Hi,

If you are going to hook up the DVD player to your TV through RCA cords, see the picture below.





Hook up the yellow RCA cord at the Video-in at the back of the TV and the other end at the Video out of the DVD player to get the video.

Hook up the red RCA cord at the Audio-in(right channel) at the back of the TV and the other end at the Audio-out of the DVD player.
Hook up the white/black RCA cord at the Audio-in(left channel) at the back of the TV and the other end at the Audio-out of the DVD player.

Red and white/black RCA cord is for the sound.

Hope I helped you.
Have a nice day!
Thanks for using Fixya.

make sure output channel from DVD and input channel/setting on TV are set correctly

check the scart lead is fully on both tv and dvd

I would just hook up the dvd/vhs player with the red,white,yellow rca cables that should of come with your unit and just go to the input on the tv to watch your dvd/vhs player. This will give you a better picture and sound while allowing you not to have to watch dvd/vhs on a channel which helps make the dvd/vhs player independent. Also if possible I would hook the converter box up with the red,white, yellow rca cables to the tv as well if your tv has more than one set of red,white,yellow plugs since it is a better connection that coax and you probably watch more tv than vhs/dvd anyway. So bottom line try to hook up both boxes red,white,yellow and watch each box on different inputs instead of like channel 3 or 4. Also to record of converter box you can run coax from converter box to dvd/vhs combo and make sure your dvd/vhs player is on tuner input or channel 3.

I’m happy to help further over the phone at https://www.6ya.com/expert/brandon_60dfebff379d64bd

Sounds like you are either trying to play an NTSC (US or Asian) DVD on a PAL (European) TV.

Go into the DVD settings and look for picture, video or display options.

If the DVD is set to NTSC, then set to PAL.

if you are useing componet output and the pic is black and white you have them hooked up in the wrong order
The Cableguy

There some thing that you had done to get black and white on your tv with the dvd ,check your connections.if the connections are properly connected then the tv could be having a problem in the video input, have a tech look at it.