Question about Polaroid TLA-01911C TV

2 Answers

PROB LEM WITH POLAROID TLA-01911C

THIS TV POLAROID TLA-01911C, WHEN TURN IT ON IT JUST COMES UP WITH JUST A WHITE SCREEN. WHEN YOU TURN IT OFF YOU MUST UNPLUG IT FROM THE POWER.

Posted by mdale2 on

Ad

2 Answers

Buddy Mcsparrin

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,684 Answers

Hello,

The white screen and nothing else usually indicates a failure of the filter capacitors in the power supply board. When these capacitors go out the voltages are not correct so the TV can not power up right. You can rebuild the power board by replacing the bad capacitors and this should bring the TV back to life. Here is a link to a repair guide for this power supply board.

http://www.ccl-la.com/blog/index.php/repairing-a-polaroid-tla-01911c-with-a-bad-power-supply/

I hope this helps,
BuddyMc

Posted on Jul 16, 2012

Ad

Domingo Mendoza

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 12 Answers

It is related with Power

Posted on Sep 21, 2010

  • Anonymous Sep 21, 2010

    It is related with Power

  • Domingo Mendoza Sep 21, 2010

    It is related to Power & Inverter Board. Price is around 80 dlls.

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fix sound on Polaroid TLA-01911C TV


Audio amp may be blown. A cable may be bad.
What are you connected to?

Apr 04, 2014 | Polaroid TLA-01911C TV

1 Answer

When I turn on my tv the screen is white and nothing else happens.


This is a common symptom of a power supply failure on the TLA-01911c. The board has parts called capacitors that filter the output power and when they go bad the power supply does not power up right. The unit can either have no power, just a flashing power light, just a white screen or it could take a long time to show a picture. Here is a link to a repair guide that shows what to replace on the power supply board to repair the unit.

http://www.ccl-la.com/blog/index.php/repairing-a-polaroid-fla-01911c-with-a-bad-power-supply/

I hope this helps you get your TV bad up and running,
BuddyMc

Jul 13, 2012 | Polaroid TLA-01911C TV

1 Answer

POLAROID TLA-01911C turns on but only white screen. no sound


Hello
The main board has the fault. Your set need a thorough check before confirmiing the fiault.
This is the picture of the board. OK.
2_16_2012_4_20_33_pm.jpg

Feb 16, 2012 | Polaroid TLA-01911C TV

1 Answer

My TV has a white/gray screen when I turn it on. I get nothing else, no sound either.


Hello,

A white or gray screen usually means the power supply board is not functioning correctly. Below is a repair guide showing what to look for on your power supply board. Open the back of your TV and look at the power supply board as shown in the repair guide. If the capacitors are bulging on the top then they have failed and replacing them should get the board and TV back up and running. This is a very easy repair if you can do a little soldering.

http://www.ccl-la.com/blog/index.php/repairing-a-polaroid-tla-01911c-with-a-bad-power-supply/

I hope this helps,
BuddyMc

Sep 12, 2011 | Polaroid TLA-01911C TV

1 Answer

Need a manual for Polaroid TLA-01911C


http://www.hdtvreview.com/Polaroid-TLA-01911C-hdtv.html

May 07, 2011 | Polaroid TLA-01911C TV

1 Answer

Hi the tv just went to a white screen..nothing..what could be the issue..


Ur tv still have sound when the screen are white?Yes?The Tuner board is dead,need it replaced.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish Tuner board for the replacement.

May 21, 2010 | Polaroid TLA-01911C TV

2 Answers

Polaroid TLA-04011C


Check the powersupply/inverter board for bad capacitors. Also check the CCFL bulbs in the top and bottom for poor solder connection - replace if necessary.

Nov 08, 2008 | Polaroid TLA-01911C TV

Not finding what you are looking for?
Polaroid TLA-01911C TV Logo

Related Topics:

1,131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76321 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

CoppellTVRepair.com

Level 3 Expert

778 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...