YP-U2J - Need download - Didn't come with CD

YP-K3JABY

YP-K3JQB

YP-K3JQBY

YP-K3JQG

YP-K3JQG/XAA

YP-K3JQR

YP-K3JQRY

YP-K3JQWE

You will click on the one that is your MP3 player at the website to get the info you need.

Please Rate Me

1. Download the YP-U2J Updater
   
2. Remove Mp3 player if you already connected to the USB port
   
3. Run the program (You should see something like: Please connect the device)
4. Hold down the Play button and connect the Mp3 Player to USB port(Hold down the play button while you connect the device, you should seea message (normally after 8 seconds) like: Initializing on YP-U2J Updater program screen)
   
5. After you hear the Windows chime "new device found" or the message"Initializing" on YP-U2J Updater, you can now remove your hand fromplay button.
6. Check the Format Data Area checkbox (By clicking the yes button, you will lose all of your data in your Mp3 player)
   
7. Click the "yes" button
   
8. Finally, click on the Start button (takes less than a minute). DO NOT REMOVE YOUR DEVICE
   
9. IMPORTANT: After updating the firmware, you MUSTdisconnect the Mp3 player and turn it on. You will see a 20% messagefor about 50 seconds and it will be restarted automatically.

1. Download the YP-U2J Updater
   
2. Remove Mp3 player if you already connected to the USB port
   
3. Run the program (You should see something like: Please connect the device)
4. Hold down the Play button and connect the Mp3 Player to USB port (Hold down the play button while you connect the device, you should see a message (normally after 8 seconds) like: Initializing on YP-U2J Updater program screen)
   
5. After you hear the Windows chime "new device found" or the message "Initializing" on YP-U2J Updater, you can now remove your hand from play button.
6. Check the Format Data Area checkbox (By clicking the yes button, you will lose all of your data in your Mp3 player)
   
7. Click the "yes" button
   
8. Finally, click on the Start button (takes less than a minute). DO NOT REMOVE YOUR DEVICE
   
9. IMPORTANT: After updating the firmware, you MUST disconnect the Mp3 player and turn it on. You will see a 20% message for about 50 seconds and it will be restarted automatically.

1. Download the YP-U2J Updater
   
2. Remove Mp3 player if you already connected to the USB port
   
3. Run the program (You should see something like: Please connect the device)
4. Hold down the Play button and connect the Mp3 Player to USB port (Hold down the play button while you connect the device, you should see a message (normally after 8 seconds) like: Initializing on YP-U2J Updater program screen)
   
5. After you hear the Windows chime "new device found" or the message "Initializing" on YP-U2J Updater, you can now remove your hand from play button.
6. Check the Format Data Area checkbox (By clicking the yes button, you will lose all of your data in your Mp3 player)
   
7. Click the "yes" button
   
8. Finally, click on the Start button (takes less than a minute). DO NOT REMOVE YOUR DEVICE
   
9. IMPORTANT: After updating the firmware, you MUST disconnect the Mp3 player and turn it on. You will see a 20% message for about 50 seconds and it will be restarted automatically.