My touch button at bottom of touch pad doesnt work on left side,but right button is ok.you cant feel it click,any suggestions,its a acer 5100 aspire

I believe there are many types of Acer Aspire One what is the model number. Also, keep looking for a mouse button I think they all have one.
Thank!

Check the drivers for the touch pad..install it again..use the below link
http://ud-pc.com/notebook/driver/Acer/Aspire_One/Touchpad_Synaptics_v.11.1.4.zip

else contact acer..your touch pad must have to be replaced(Acer Tech. Number: 1-800-426-7378)

I use this site for replacement keys you do not have to replace the whole board and this has a tutorial to go with it. Click Here I do hope that this assisted in your need, thanks for using FixYa! do not forget to place a vote for me John

hi..

you have two buttons near the touch pad. left one for left clich and right side one for right click

if my answer was useful please vote me

Hey!

What operating system are you running? All I could find was a manual for your model: http://tinyurl.com/6gc7pl

If you are using Windows XP, you might try going to Control Panel -> Mouse -> On the first tab (Buttons) check "Switch primary and secondary buttons." then hit "Apply".

Try left-clicking (currently assigned to be the right-click) on your Start button and see if the menu with "Explore All Users" on the very bottom opens. If it does, then your touchpad is most likely defective and would have to be fixed (www.fixmyacer.com). If the menu doesn't come up, then it is a software issue and is 100% fixable.

Matt Newelski
www.newelski.com

have k/b and touch pad been disabled in BIOS?

ahh..well..the cable is under the keyboard..not hard to get to..visual inspection will make it obvious if that is the issue..

go to my computer, right click, properties, device manager, look down list for mice and pointing devices, click '+' sign, you will see your touchpad, right click select uninstal, then restart notebook it will reinstall itself and should be working as normal.

Make sure that it is turned on in the control panel and that the drivers are up to date and are the right one by the manufacturers. 

Double click the icon in the toolbar. Click the device settings tab and then hit setting. select buttons in the list on the left side. Hit the plus sign(maximize) and select scroll up button action....scroll down button action...Etc. For each action select what you want it to do and just hit apply and move to the next. Once you have selected the action for scroll up, down , left, and right hit apply again just to be sure and try it. It should work. I just did it on my 5630 but Im assuming it works the same.