Question about Sharp AL 1631 Copier

1 Answer

Sharp AL-1631 has 3H error code

I turn on the copier and display shows 3H error. What does this mean? How can IU fix this?

Posted by on

  • biomedicoleo Jun 06, 2008

    I turn on the copier and display shows 3H error. What does this mean?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 871 Answers

3H error means overheating...what you can do is supply new fans or clean the unit for dust and others. check for the exhaust fans if its still working. this will reslove your problem.

hope this helps

Posted on Jan 27, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW FOR FIX A STUBBORN CODE ERROR C2557 IN BIZHUB222


Description

ATDC Sensor Failure
- The scanning value of the ATDC Sensor is less than 7 % while the IU Motor is turning.
- The scanning value of the ATDC Sensor is more than 19 % while the IU Motor is turning.

Remedy

1 Check the UN2 connector for proper connection and correct as necessary. 2 Remove the Developing Unit from the IU, and then replace UN2. 3 Run F8. 4 Change PWB-A. 5 Change PU1N.

Jul 03, 2018 | Konica Minolta bizhub Office Equipment &...

2 Answers

How can I solve error code c255A



From another site

Details Subject:
C-255A (C255A), C-255B (C255B), C-2559 (C2559) or C-255C (C255C) at power up.
Description:
C-255x code at power up.
Solution:
CAUSE: The K (black) IU (C-255C) has failed. The M (Magenta) IU (C-255A), Y (Yellow) IU (C-255B) or C (Cyan) IU (C-2559) is not fully seated or has failed.

SOLUTION: Replace the K (black) IU (Item #A0DE02F for the bizhub C203/C253 and Item #A0DE03F for the bizhub C353). Reseat the color IU and if the problem persists, replace it. Item # Color IU Model
A0DE0CF Magenta bizhub C203/C253
A0DE0DF Magenta bizhub C353
A0DE06F Yellow bizhub C203/C253
A0DE07F Yellow bizhub C353
A0DE0HF Cyan bizhub C203/C253
A0DE0JF Cyan bizhub C353
SPECIAL NOTE: Solution contribution by Tom Kelly, Workgroup/SSD

Attachments:




Options:
None Specified Details Subject:
After toner installation, C255x code within a few hundred prints.

Description:
C2551, C2553, C2555 or C2557 codes.
Solution:
CAUSE: Toner is not supplied due to abnormal position of coupling.

Normal condition The coupling is blocked by bracket

May 03, 2014 | Konica Minolta bizhub C250 All-In-One...

1 Answer

C2557


C2557 ATDC Sensor Failure
• The scanning value of the ATDC Sensor is less
than 7 % while the IU Motor is turning.
• The scanning value of the ATDC Sensor is more than 19 % while the IU Motor is turning.

This is form the service manual, The meaning is developer material or the worst case you should change the entire ATDC sensor.

Jan 23, 2014 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

IU


replace black Imagin unit drum

Jul 09, 2013 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Samsung scx6555n showing error #31-007


I have encountered this problem twice on the same machine with different imaging units. I haven't received an answer from Samsung (presumably they will fix with a firmware update, their solution to everything) but the message and the red light can be cleared by powering down, reseating the the IU and powering back up. The good news is the user can still use the machine, even with the code.

Sep 13, 2012 | Samsung SAMSUNG SCX6555N LASER...

1 Answer

Display flashes 3h


Hello sir; H3 code require a reset procedure as follow;
press "clear", "expoaure", "clear", "exposure", then enter 14 press start, it will back to normal.

Oct 02, 2009 | Sharp AL-1642CS Copier

3 Answers

Gestetner-2412Z copier-error code UF


UF is a panasonic code,the u means user fix.If you have an users guide it will tell u what to do.

Mar 03, 2008 | Gestetner DSm515pfd Digital Copier -...

5 Answers

How to locate and replace copier exhaust fan


Hi, H3 is abnormal high tempeature in the fuser. Never had issues with the fan, probably you have a 'melt down', inspect the fuser through the sprung loaded flap and see if the three picker fingers that rest on the roller are melted. If they are then you require a fuser rebuild to include both fuser rollers, fingers, bearings and thermal fuse.

Cheers

Andy

Feb 11, 2008 | Sharp AL 1631 Copier

6 Answers

Error code E005


if your machine is giving E-005 that means your fixing assembly (fuser cleaning web is not detecting) is bad.

go in service mode by pressing additional fuction + 2 & 8 + again press addtional function

If you find that the E005 code won't reset after replacing the Web, and clearing both web counters in service mode, <COPIER>COUNTER>MISC>FIX-WEB> and <COPIER>COUNTER>DRBL-1>FIX-WEB> perform a Error Clear in service mode <COPIER>FUNCTION>CLEAR>ERR>.


enjoy

Sep 28, 2007 | Canon imageRUNNER 400S Copier

Not finding what you are looking for?
Sharp AL 1631 Copier Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...