Is there a web site where you can down load instructiions for leapster games

Try this
Ensure that a cartridge is not inserted
Hold down the Hint (?) button while turning the unit on. Continue to hold the Hint button down until the LEAPSTER menu appears.When the LEAPSTER menu screen appears, press the A button.Touch each of the crosshairs that appear with the stylus, Restart unit

• Follow these steps to calibrate your Leapster Learning Game system -

1. Remove any game and turn the Leapster off.
2. Turn the unit on.
3. When the sign in screen appears immediately press and hold down "home"(house), "hint"(question mark), and "B" buttons together for 4 seconds.
4. Now you will see a few options.
5. Press the "A" button for the touch calibration option.
6. Now just touch the stylus on the cross-hairs and it will be calibrated.
7. Now you want to restart the unit.
8. Redo the steps if this should not work the first time.

Regards, Tony

You actually can download all 4 starter games and 9 of mini demo games. But you need to have 4 Leapster 2 console to download each of the starter and some demo games and then combine the games in your PC. I just got mine here:
http://leapster-2.blogspot.com/

Welcome to FixYa!



Ensure NO GAME is in unit
Power Unit off
While turning Leapster 2 on, hold down HINT KEY. (Key in middle with question mark on left hand side)

Once unit switches to other menu, Hit A to begin calibrating.
Follow prompts with Sylas pen to reprogram Stylus pen.
Once you are done it will return to original Calibrating Menu.
Power Unit off Turn unit on with game inserted. Stylus pen should respond.



1) Ensure that a cartridge is not inserted

2) Hold down the Hint (?) button while turning the unit on. Continue to hold the Hint button down until the LEAPSTER menu appears. 3) When the LEAPSTER menu screen appears, press the A button 4) Touch each of the crosshairs that appear with the stylus 5) Restart unit


Do comment if it helped or not in any manner ill know.

X-WING worked with the dash in between.

http://www.leapfrog.com/leapsterworld/codes.html

If your Leapster2 does not respond to the stylus pen, it needs to be calibrated. Calibrating the Leapster2 is easy:
1) Ensure that a cartridge is not inserted 2) Hold down the Hint (?) button while turning the unit on. Continue to hold the Hint button down until the LEAPSTER menu appears. 3) When the LEAPSTER menu screen appears, press the A button 4) Touch each of the crosshairs that appear with the stylus 5) Restart unit

leapster 2 comes on but when you touch screen with pin wont do anything

Dont know about you're first question. But the leapster 2 uses non High Capacity SD cards (it can not read them) so you are limited to 2 GB max.

Take the cartridge out of the Leapster, blow into the opening with your mouth. Do the same with the Leapster (blow into it). Insert the cartridge and see if that works.