It doesn't turn on and I don't see the red indicator on the IR module. I have tried replacing the fuses but still no go. I opened it up and don't see any visible burns on abnormalities. If someone can guide me through the inners of this system I can probably at least convert this to just a sub-woofer and get another receiver. thank you
Fix for this question is as follows.
Replace the diodes with a bigger diode to fix the problem.
Replace with part number 276-1144 (3amps/400PIV).
I just bought mine and i dont have a warranty!!!
Shamp
first things first:
1) replace the board with another, if you has warranty.
2) RMS the xbox for a board fix. (paying for that)
3) you can take it to the repair electronic store, they sometimes have the schematics
good luck
2,031 views
Usually answered in minutes!
CORRECTION: upon further examination I saw slight burn marks on the four diodes located on the board with 2 power cables. Someone in another thread mensioned that the diodes need to be replaced and resoldered. Anyone know where can i find this stuff, what type of diodes I need, how to take the exisiting ones out? thanks
I have same problem, except the red light on the receiver DOES still light up, and is currently on, just when i hit power on remote, no responce, and it doesnt turn on *I replaced the batteries in the controller, even though the green indicator light still lit up, and still not working*
Replace it with a bigger diode to fix the problem.replace with part number 276-1144 (3amps/400PIV).
×