Question about Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Hi there, my hotpointwf540 stopped working part way through a wash, now the power light is flashing rapidly and also the mini load and reduced creases light are flashing

Posted by paul1976152 on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 232 Answers

Check for debri in pump. the tech sheet inside the machine will tell what flashing lights mean unplug cord from wall first!!!

Posted on Dec 27, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint fault codes


try a different store.

Oct 31, 2013 | Washing Machines

2 Answers

Hotpoint wf540 stopping on a rinse and spin and


check pump/filter/outlet hose for blockages. if ok, check pressure switch (disc shaped item at top of machine with 4? wires and a tube) by blowing into it gently - should hear clicks, then blow into tube to pressure chamber - should be clear.

Oct 26, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Lights flashing on WF320P


i'm having same problem people have said empty filtter but i have done that and the water is running out but still flashing
so sorry wish i could help.

Sep 05, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

My washing machine has just stopped working and the on/off light and the mini load light are flashing rapidly any ideas???? make ..hotpoint, model...WF560


TRY HOLDING IN THE SIGNAL LITE FOR 3 SECONDS AND THAT SHOULD TURN THE LITES OFF AND OR THE CONTROL LOCK LITE OFF ALSO!! GOOD LUCK

Jun 03, 2009 | Hotpoint WMA35 Front Load Washer

1 Answer

Hi my hotpoint wf541 will not run the start stop light and the mini load light are flashing i believe these are fault codes but have no refrences to what they are


I have encountered a similar problem. The following lights were flashing on and off:

  • On/Off.
  • Reduced creases.
  • Mini Load.
I also found that previously one of the 'lifters' inside the drum had broken off and someone had tried to put it back in place and continued to use the washing machine. After a short period of time the above mentioned flashing lights began.

I first suspected the pump, but this was fine. I then disconnected the hose which connects the hole from the drum to the pump and I found a child's sock blocking the hose. I removed the obstruction, put it back together and the machine worked perfectly. I also replaced the lifter (apparently these break quite often) and the machine has been working perfectly ever since that day.

I hope this helps. Good luck.

Apr 04, 2009 | Washing Machines

2 Answers

Display lights flash


I have just posted the same problem about the lights flashing rapidly, I have just gone to investigate my machine and switched it off and on again at the mains and so far it has resolved the problem. Hope this works for you.

Mar 09, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Machine freezing with three lights flashing.


HI JOHNNYHEFF,
JUST GOT A NEW HOTPOINT STARTED TEST WASH ALL THE LIGHTS FLASHED SO SWITCHED OFF TRIED AGAIN NO JOY. TECHNICIAN COME OUT SAID THE CIRCUIT BOARD WAS GONE, NOT GOOD NEWS FOR YOU BUT THOUGHT I'D LET YOU KNOW!

Oct 23, 2008 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

ON/OFF & Time saver Button keeps flashing


For mine, it started flashing the on/off light along with the "drying high heat" and the "reduce crease".
Unplugging the unit for 30 minutes appears to have reset the machine and it is now working.

Aug 18, 2008 | Hotpoint Aquarius WD640 Front Load...

4 Answers

HOTPOINT AQUARIUS WF 250 ON/OFF LIGHTS FLASHING


The lights are set off by the balance sensors.And if your balance sensors are  stopping    it from spinning than you first have to make sure the washer is level.You  could have bad Shocks and a bad electronic control board,.                                    

May 05, 2008 | Hotpoint Aquarius WF000 Front Load Washer

Not finding what you are looking for?
Hotpoint Aquarius WF000 Front Load Washer Logo

596 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

gbob59

Level 3 Expert

3063 Answers

Eric Taylor

Level 3 Expert

590 Answers

Richard C Cohen
Richard C Cohen

Level 2 Expert

171 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...