Question about Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Hi We have a problem with our Fisher & Paykel double drawer model which gave us no hassle for over one year.
Model:DD605IH , Top drawer is stuck, after error with the start button Led flashing red and beeping.
After switching the machine off at the mains and switching it on again the beep disappears.
Powering the top drawer on with the on button on the drawer panel results in the green start Led flashing and eventually turning off.
Posted by ag32 on
First is to make sure there is no leak. Pull out the lower tube, access from the left side only this side you can put your hand in with a small tower to dry out the wetness if there is. If it is wet dry out really good then unplug the power cord for 24 hr. After that plug power cord back. Hold the lock button while press the Start button until you see a display appears. Press the Power button to see a clear display. Then hit Start button one by one until you see Ld ( it stands for Lid down) If you miss it, keep going until it comes back in a loop. When at Ld hit the lock button. Wait until the noise is stopping. Hit the lock button again. Wait until the noise is stopping. Now you can pull out the top drawer and press the power button to get out this manual mode. Good luck.
Posted on Dec 29, 2009
Tips for a great answer:
See all Fisher and Paykel 23 in. DD-603SS Built-in Questions
Usually answered in minutes!
Level 2 Expert
Level 3 Expert
Level 3 Expert
Step 2: Please assign your manual to a product: