Question about iLO (2 GB) MP3 Player

3 Answers

My ilo mp3 player won't turn on

The screen just blinks but it wont boot up it does light up if i plug it up to the computer but once i unplug it it does not come on what should i do!

Posted by on

  • 2 more comments 
  • lil rick Jan 28, 2008

    when i turn it opn it just blinks ilo i tried every thing nothing is working!!!!!

  • Anonymous Feb 01, 2008

    My player was turning on, now I can't get it too. HELP

  • Anonymous Feb 05, 2008

    same with mine.
    it was working fine like an hour ago.
    i just tried to put a song on and now it just blinks on and off.
    i deleted the song i put on it.

  • bella954 Mar 31, 2009

    new batteries are on but my screen just blinks when I turn my Mp3 player on...

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

It was working fine like an hour ago.
i just tried to put a song on and now it just blinks on and off.
i deleted the song i put on it

Posted on Sep 17, 2010

Ad

Yes i have tried a new battery my mp3 does not have a lcd screen it does not react even when i press the play button

Posted on Feb 05, 2008

Ad

  • Level 2:

    An expert who has achieved level 2 by getting 100 points
    MVP:

    An expert that got 5 achievements.
    Governor:

    An expert whose answer got voted for 20 times.
    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Sounds like a battery problem, have you tried a brand new battery and not one you think is new?

Posted on Jan 26, 2008

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I force removd keyboard witht shutting down the PC n the laptop shutdown. Since then screen only shows a milli-seconds deem light. DVD rom light blinking. Fan not turning, only a blinkin green light.
This is a very common problem with windows laptops. This may or may not help but here goes. unplug power. then unplug battery from laptop. Now plug only power cord into laptop. Now turn on and start tapping the F2 fuction key. Once it goes into bios make sure that your boot order is cdrom first. Then save it and reboot with the bootable cd in the drive.

Also if now of this works unplugged Hard drive and see if it will boot up at all and into the bios setting. If you are not able to boot into the cmos make sure also that no cd is in the cdrom drive.

Take your time. Good Luck.

Aug 26, 2015 | Computers & Internet

1 Answer

My toshiba at200 table 10.1 wont turn on
1. When you press the power button to turn it on, do you see any thing on screen, like the toshiba boot up screen or something like that. Or is it completely blank (black color) always.

2. Can you see a faint image of your desktop (try to see it in dark place with flash light). This is important to confirm.

3. Also, when you press power button, do you see the LED lights on laptop blinking or solid green (which ones are in blinking/solid) and do hear any sound ? Or do you feel that your laptop doesnt even try to boot.

4. Can you hear any Beeps when you try to turn on the computer. If yes, what is the sequence of those beeps.

Continued......
If you answers are -
1. blank
2. no image
3. only the satellite light is blue, the powercord is blue and the battery is blue
4. no noise

Please do the following carefully and let me know result :
1. Shutdown and Unplug your laptop.
2. Remove the battery from the laptop.
3. Wait 2-3 minutes
4. Now press ON (power button on laptop) for 1 minute
5. Then release the finger and wait one more minute.
6. Now plug in the power cable (dont insert battery yet) and press ON button.
7. Did your screen start working now ? (do you see windows loading)

Jan 04, 2015 | Video Game Consoles & Games

1 Answer

Compaq presario v6101uswont boot not even start up screen
When you plug in the power cord is there any lightswhatsoever on the laptop, where the plug goes in or on the AC Adapter of thepower cord?

When you press the power button do you hear fans running, hard drive spinning,lights on the computer, hear any beeps or lights constantly blinking, hear theDvD/CD drive click and the light on the drawer of the DvD/CD turn on for asecond or two? If so the laptop is trying to boot or may have booted, butthe screen is not showing for some reason.

Beep tones and blinking lights tells the technicians what is going on with thelaptop and why it is not booting. Most times it's a motherboard issuewhen you hear beeps or blinking lights continuous.


Maybe you have a Static Charge Buildup. Remove the Power Cord, Remove theBattery, then Press and Hold the power button for 30seconds. After 30 seconds plug the power cord back in (leave the batteryout) and hit the power button to see if it boots. If it does, you can putthe battery back in and let it charge.

Apr 09, 2012 | Microsoft HP Compaq Presario V6101US...

2 Answers

I have an all white screen when I. start my computer
From the descrition this is a motherboard problem, Hp is well known for issues of this sort. Hook a spare monitor to the video output usually on the back, if picture okay! there is a problem with the new screen. But if both show the same symptoms it is the Video Graphics Card normally built into the motherboard. If that is the case a motherboard replacement will be expensive.

Mar 31, 2012 | HP ProBook 4510s FM849UT Notebook

1 Answer

My laptop shuts off after i turn it on.why
Does your laptop even begin the boot process where it displays stuff on the screen? Do you hear fans running, disk drives running, see lights, hear the cd drive click once and notice a light that comes on the cd drive door briefly when you press the power button? If not you computer either has a bad power cord, a bad dc power jack where the power cord plugs in, a bad mother board or static build up. 1) lets eliminate static buildup by removing the power cord and the battery then press and hold the power button for 30 seconds. Then replace the power cord but not the battery and hit the power button. If it boots up you had static build up. 2) Take an ink pen and put in in the slot where the power cord plugs into the laptop, if it wiggles loosely then your dc power jack which is soldered onto the motherboard needs to be replaced. 3) If the power jack is tight and when you plug in the power cord if you don't see any lights or hear a fan, disc, cd drive, then you can almost bet your power cord is bad. 4) If the power cord is ok then you have a mother board issue. Normally motherboards will give some beeps or constantly blinking lights when you plug in the power cord and try to boot up. These beeps or blinking lights will tell the technician what is wrong with your computer.

Mar 19, 2012 | Acer Aspire One Netbook 8.9" Notebook

2 Answers

Tv wont come on and a red light is blinking. I have a Sony Wide screen projection TV model kp-46wt520
Can you unplug the TV for about 15 seconds, and then plug back in and watch the stand-by light. Tell me how many time the stand-by light blinks in regular intervals. If it doesn't blink at all, you need to change a fuse on the g-board. Once this is done run back through the stand-by blink light process, and more troubleshooting can be done if problem isn't already solved. If the stand-by light just keeps blinking with a count over ten just tell me, and I'll look for other possibilities.

Oct 25, 2009 | Sony KP-46WT520 46" Rear Projection...

1 Answer

Mitsubishi WS-65511 HDTV
Well, this is how that set is supposed to work. After it is plugged in the LED should blink for 70 to 90 seconds. That is normal and is the amount of time it takes for the Digital Module to boot up. During 'boot up' time the set is inoperable. Once the LED stops the set should operate normally. If the blinking never stops there is a problem with the Digital Module. If the blinking does stop but the set wont come on there are other things you can do to narrow down why the set is not working.

Jun 02, 2009 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Blinking light on Westell 6100 DSL modem
I have a westell 6100 modem also- The light your are talking about always blinks- it blinks as long as the internet is working (it is sending and transmitting data)

May 28, 2009 | Westell Wirespeed LiteLine 6100...

1 Answer

Wont boot/start
Turn off power, unplug, hold power button for 30 seconds, take out memory, or if you have more than one stick only take all but 1, plug the power back in and start the computer. If a screen pops up that bios has changed press F2 to continue once computer is completly loaded click start, shut sown, unplug power cord again, hold power button 30 seconds, insert other memory and restart

May 13, 2009 | E-Machines eMachines Desktop PC

2 Answers

Won't boot..
dear,
u unplugged everything and it booted up finely.
its mean that there is something wrong with the drviers.
check it one by one. just plug hard driver first and let is boot. if its still behaving the same as after plugging all then the problem is caused by the hard drive.

regards,

Aug 14, 2008 | Acer Aspire™ T180 PC Desktop

Not finding what you are looking for?

View Most Popular

(2 GB) MP3 Player

  • Audio Players & Recorders

Related Question

I force removd keyboard witht shutting down the PC n the laptop shutdown. Since then screen only shows a milli-seconds deem light. DVD rom light blinking. Fan not turning, only a blinkin green light.

  • Computers & Internet

Open Questions:

0 Answers

i need help downloading my cd for my mp3 player it won't download on my windows 7 computer

Aug 14, 2016 | iLO (2 GB) MP3 Player

0 Answers

why can't i play my downloaded music, it keeps saying empty disk

Jul 06, 2014 | iLO (2 GB) MP3 Player

0 Answers

how to turn on Omnitech MP3/WMA/REC?

May 31, 2014 | iLO (2 GB) MP3 Player

0 Answers

i have just switched off my matsui 42p900 tv to move it,and now when i have plugged it back in the standby light is not coming back on,the fuse is ok,i had the same problem last year when i switched it off to go on holiday but i cannot remember how i got it back on

May 31, 2014 | iLO (2 GB) MP3 Player

See all iLO (2 GB) MP3 Player Questions

Related Topics

iLO (2 GB) MP3 Player Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

52 Answers
How to remove write protect on my usb flash drive?

iLO (2 GB) MP3 Player

8 Answers
"storage device policies" key is missing from my registry...!!!

iLO (2 GB) MP3 Player

25 Answers
How to download songs to the MP3 player

iLO (2 GB) MP3 Player

8 Answers
My USB flash memory is write protected

iLO (2 GB) MP3 Player

10 Answers
Removing write protection of USB pen drive

iLO (2 GB) MP3 Player

Latest Celebrity Headphones Report
Latest Celebrity Headphones Report

View all Fixya Reports

Top iLO Audio Players & Recorders Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Ekse

Level 3 Expert

13434 Answers

Siul Oyaratgam

Level 2 Expert

317 Answers

Are you an iLO Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...