Connect samsung wep460 bluetooth device to a PC

Usually, you don't "reset" a bluetooth headset. You simply "pair" it to a new device. Instructions are in your manual. If you have lost your manual, you can download another one from the Samsung Support site at: http://www.samsung.com/us/support/owners/product/AWEP460JBE

switch on both bluetooths search for devices on your phone you will get wep460 click connect it will connect...

Turn on your bluetooth headset. On your mobile, turn on bluetooth and search for bluetooth devices. When your bluetooth headset is detected, select it and it will be "paired"with your phone and whenever the headset is turned on all audio output(such as call, music etc.,) can be heard through the headset.

Sai.

Try to put your headset in pairing mode, prior to trying to pair it with your phone. If it has never been paired with another device defore, just by turning it on, it should enter that mode, denoted by its indicator light being steadily lit in blue. Otherwise, turn your headset off. Then, press and hold the Muiti-Function Button for far more seconds than the time required to turn it on, until its indicator light is steadily lit in blue. Then, within the next couple of minutes, bring your phone and headset close to each other, and make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make your phone connect to it. If a pairing code (or PIN, or passcode) is requested, enter '0000' (four zeros). If the pairing process is successful, your headset should enter the stand-by mode. There should be an indication on your phone too, that the pairing process has been successful. Otherwise, turn you headset off and repeat the pairing process all over again.
Hope you are able to sort your problems out soon. Anyway, please, let me know if I can help you any further.
By the way, if your headset's quick start guide happens to be missing, feel free to download it from this location.
Regards, Carlos

Hello,

You cannot pair samsung bluetooth device with other mobile brands. for pairing and mobile with bluetooth device you need an universal bluetooth.

regards,
mukesh

You have to make sure your blue tooth device is in discovery mode .most blue tooth manufactures use the power button by holding it down for 6 to 10 seconds while turning your bt device on ,once in discovery mode they should pair but you will need a pin or pairing code.Most blue tooth device manufactures use a factory 4 digit pin they are as follows 0000,1234,1111, or 9999 i hope this helps

TO HEAR MUSIC ALSO YOU HAVE TO PAIR THE DEVICES. GO TO THE VISIBILITY OR BLUETOOTH OPTIONS AND CONNECT THE PHONE AND THE DEVICE TO HEAR MUSIC. OR ELSE THERE WILL BE PROBLEM IN THAT DEVICE. IF THERE TRY TO CHANGE IT. THANK YOU

go to the menu on your phone select manage connections set up bluetooth then you'll see search listen, etc. position on search don't press yet
get your ear piece ready: press the on button and hold it until you see a solid blue light (not blinking but solid) if it blinks try again until you get a solid blue light (it takes about 5-8 seconds) when that happens go to your phone and press search it will look for devices (it may find several) look for your earpiece model and select it
it will ask for a code or passkey, type 0000. Then it's going to ask if you want to bond or pair click yes and it will connect
check on the connection manager again and your bluetooth should be on and connected.

make sure that your bluetooth headset is charged and it is on while pairing

Be sure the the headset in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF, then hold the power button until it goes into pairing mode as discribed above.
Then you can discover it with your phone or PC. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999