Re: How do I change my SL-DT100 from 2.1 to 5.1 surround...
Switch the Dolby PL off and the dvd will sound like it was meant to. PL is for films that do not have Dolby it tries to replicate the sound. For non Dolby pictures press PL and it will try and replicate !
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
break off your audio from the back of you cable/dish box. There will be a left and a right audio out. Take that to your surround sound system on the left and right in. Change the input to where you have it plugged in on the receiver and you should be good to go.
find the menu on the reciver. there will be adjustments for each speaker. if not that. change it to a different sound setting like cinama,rock,surround,movie,ext. try each one differ setting use differ speakers
is your surround system has a phono input? because most of the turntable can only work with the unit that has a phono input, phono input has a a built-in pre-amp. so if you're only hooking your turntable to an ordinary input then this might be the case, you won't hear any sound or sometimes weak sound.
If the display reads 2 chan then that means stereo, and the sound mode is not in any type of surround processing. For your surround speakers to operate you must select a surround sound mode.
I would first go into your audio menu and make sure the correct settings haven't been changed, also the variable or fixed output is on fixed.
Does your set have the external surround sound speakers for the rear or are you using an external surround sound audio system?
hello only if your tv is the same brand as you dvd home......i think in this case you can not...this is why the output on the rear tv deliver only the signal to be amplified by any other device example a dvd.amplifier..etc saludos
the problem you have seems to be on programing the master effects to get to it go to main menu and see the distribution and effects you want to hear on you home theather.remember that home surround needs some decoders to send the sound where the images come and its right built in....
×