Need power supply board for akai model lct32d do not know if same as lct3201ad ?

The AKAI LCT3201AD I got from a friend who didn't know it was stuck in stand by. Took it to the local TV repair guy who charged me $25 deposit to check it out and replaced the power supply for $99 total. Works good except for DVD player that won't eject. Just need to figure out what bolts are to be used for mounting to the wall.

you have a power supply problem there are caps in the power supply that fail the will be bulged on the top these have to be replaced in most cases or a fast switching diode
or get a replacment power supply and exchange it

The power supply is defective and will need to be replace or repair since no new boards are being manufactured.
I repair these power supplies, write to [email protected] if you require further information or assistance.

lcd parts.com

It depends what model of power supply you have. They are easy to spot when they are defective, you should see them bulging on top or bottom.
What is the part number or model of power supply you have?
Let me know if you need further assistance.

What's your asking price?

I will say that the part that you bought could have been removed from another LCD and it might not be working properly due to components that become defective when they overheat.
It looks like there are not service parts or they are difficult to find.
Most power supplies I've repaired have components that failed after about 1500 hours of use.
The only way to get the LCD working is to repair the power supply to the component level instead of swapping it.
In about 95% of the time the power board is defective.
Let me know if you need further assistance.

Hi, this was for the TV model LCT3201AD. My TV was about a tear old when the TV went out. It may be that the power supply is out. TIto

Hi artoo
if you want you can fix the power supply. i know service tech who fixed my tv power supply. His email is [email protected].

The MLT169A is a version number issued by MegaMeet in asia who built the supply. The correct part number for the SMPS for that unit is: E7802-005008 and unfortunately they are no longer available... However, there is some good news, those supplies can usually be rebuilt but you need to have the equipment, knowledge to make the repair...
Bill