How do you set the clock? Sony drive 5 w/disc player (selectable sub-out)

Check the mode of operation. There can be a setting where it just plays one disc. Random or mixed will give you more songs to get to other discs.

I have sony bluray disc player S370 I went to set up scrolled down to resetting selected "reset to factory default settings" scrolled down and selected "system settings" and selected "start" turned off the dvd player waited about 5 seconds and turned it back on. Choose netflix, which is what I was having trouble with in the first place, and it connected. I haven't tried other internet connections through the system, however, if this is truly a sony server issue, it should correct any internet connection issue you may be having.

To set the clock:

Press and hold the select button until the setup display appears.

Press the select button repeatedly until "CLOCK-ADJ" appears

Press SEEK + (the hour indication flashes)

Rotate the control dial to set the hour and minute. (To move between hour and minute, press SEEK + or -)

After setting the minute, press the select button and the setup is complete.


To display the clock, press the DSPL/SCRL button.

make sure the unit is switched off and the clock is displayed then

1 Press and hold (SEL).
The setup display appears.
2 Press (SEL) repeatedly until the
desired item appears.
3 Press the volume +/– button to select
the setting (example “ON” or “OFF”).
4 Press and hold (SEL).
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press < or ,.
The following items can be set (follow the page
reference for details):
“z” indicates the default settings.
*1 When the unit is turned off.
*2 When the audio output is set to “SUB.”
CLOCK-ADJ
(Clock Adjust)
(page 4)
BEEP To set “BEEP-ON” (z) or
“BEEP-OFF.”
SUB/REAR*1 To switch the audio output.
– “SUB” (z): to output to a
subwoofer.
– “REAR”: to output to a
power amplifier.
DIM (Dimmer) To change the brightness of the
display.
– “DIM-ON”: to dim the
display.
– “DIM-OFF” (z): to
deactivate the dimmer.
DEMO*1
(Demonstration)
To set “DEMO-ON” (z) or
“DEMO-OFF” (page 4).
A.SCRL
(Auto Scroll)
To scroll long displayed items
automatically when the group/
track is changed.
– “A.SCRL-ON”: to scroll.
– “A.SCRL-OFF” (z): to not
scroll.
LPF*2 (Low
Pass Filter)
To select the cut-off frequency
“78HZ,” “125HZ” or “OFF

yes, this right but you have non compatible.sub decoder, only works on Sony parameters. sorry

The Clock on this unit uses a 12-hour digital indication.

1.) Press and hold the SELECT button. (The setup display appears.)

2.) Press the SELECT button repeatedly until "CLOCK-ADJ" appears.

3.) Press SEEK +. (the hour indication flashes)

4.) Rotate the Volume Control dial to set the hour and minute. (To move the digital indication, press
SEEK -/+)

5.) Press the SELECT button. (The setup is complete and the clock starts.)

To display the clock, press DSPL. Press DSPL again to return to the previous display.

If this helps, please leave rating!

Hold the SEL button down for more than 3 seconds. A sub menu appears. Use the track select arrow key to select the hours, rotate the volume knob to correct hour. Press track select key to select minutes, rotate volume to appropriate minute. press select again to finish. If this doesn't help, go to jvc.com, then go to support, then user manuals, enter model number. You can dowload the entire manual for free.
Good luck

Setting the clock:
1: Press and hold the select button. The setup display appears.
2: Press the select button repeatedly until "CLOCK-ADJ" appears.
3: Press SEEK +. The hour indication flashes.
4: Rotate the volume control dial to set the hour and minute.
5: Press the select button. The setup is complete and the clock starts.

To display the clock, press DSPL button. Pres DSPL button again to return to the previous display.

Setting the time
This is used to set the time on the unit’s clock
display.
1 Press AUDIO to select the time.
Press AUDIO until the time appears in the display.
2 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
display:
HOUR—MINUTE
As you select portions of the clock display the
portion selected will blink.
3 Select the correct time with 5/∞.
Pressing 5 will increase the selected hour or
minute. Pressing ∞ will decrease the selected
hour or minute.

Setting the clock
1. Press SETUP in no disc mode or full stop mode,MENU screen
appears on the TV screen.
2. Using v select SETUP MENU, then press ENTER or >,
BASIC SETUP is highlighted.
3. Using v to select “Set Clock ”, then press ENTER or >,
“Set Clock Setup ”screen appears.
4. Press</>/^/v repeatedly (or numeric buttons) to set the
date and time.
5. Press > to select “Done”or“Cancel ”, and then press ENTER ,
BASIC SETUP returns.
6. To exit, press SETUP.
7. Press POWER to turn off the unit, the clock appears on
the VFD display.

link to manual http://www.centrios.com/content/support.aspx?language=en-CA#