Lost Acer eRecovery password on Acer Travelmate 2350
Hi.
I bought an Acer TravelMate 2350 in October/November 2005.
My notebook didnot come with the OS installed but was shipped with the installation CD for Windows XP Prof OS. I installed Windows XP Prof in BIOS mode and everything was ok. If I remember correctly, during installation it asked me for a password and I think I put in the default of 000000 and changed it to some password which I have forgotten.
At a later stage, my notebook became very slow. Last year in May, one computer technician from my work tried to sort it out, but formating the HD. He couldn't break the password so that he'd re-format the hard drive and restore it to factory defaults.
We called Acer South Africa and told them about the problem, but, they didn't help at all. So this technician installed another Windows XP Prof.
At present my notebook runs on two Windows XP Prof.
During start up I need to choose the OS i want to boot up to.
I don't know what to do, my notebook is really a joke. It takes about 10 minutes to open a blank Microsoft Word document.
I want to have only one OS running my notebook, since the HD has a partition, I'd like to have both C & D formatted.
Re: Lost Acer eRecovery password on Acer Travelmate 2350
If you have access to the Windows XP CD you can delete both partitions during the build process and then create one new large partition. The screen where you would do this is the first place the build process stops after loading the drivers, etc. You will see a list of existing partitions. Highlight the first one and there will be a choice to delete the partition. You have to confirm the deletion. Then do the same thing with the second partition. At this point you can proceed with the build process allowing the build process to create a partition of the available space. Make sure that you have a copy of any drivers that are unique, especially NIC. You can typically download these from the vendor's web site.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Acer eRecovery stores pre-loaded software internally for easy driver and application re-installation. 1 Boot to Windows XP. 2 Press <Alt> + <F10> to open the Acer eRecovery utility. 3 Enter the password to proceed. The default password is six zeros. 4 In the Acer eRecovery window, select Recovery actions and click Next. 5 In the Recovery settings window, select Reinstall applications/drivers and click Next. 6 Select the desired driver/application and follow the instructions on screen to re-install. At first launch, Acer eRecovery prepares all the needed software and may take few seconds to bring up the software content window.
It can be done but to tell all how to
do it will remove the security of a password as it is confidential
information supplied under agreement with the manufacturer and his
agent. Take it to your dealer, he can do it without any problem.
Hi, You need to Acer eNET Management, the empowering Technology, using Acer eLock Management and Acer eRecovery Management, you must initialise the Empowering Technology password. Right-click on the Empowering Technology toolbar and select "Password Setup" this will enable you to do so. If you have not initialized the Empowering Technology password and run Acer eLock Management or Acer eRecovery Management, you must create it. Acer eNet Management this will assist you to quickly connect to both wired and wireless networks. to access this utility, select "Acer eNet Management" from the Empowering Technology toolbar or run the program from the Acer Empowering Technology program group in Start menu.
Your hard drive has a hidden partition that contains the original factory OS and program stored for rescue and recovery.
1 Boot to Windows.
2 Press <Alt> + <F10> to open the Acer eRecovery Management utility.
3 Enter the password to proceed. The default password is six zeros.
4 In the Acer eRecovery Management window, select Recovery actions and
click Next.
5 In the Recovery settings window, select Reinstall applications/drivers and
click Next.
6 Select the desired driver/application and follow the instructions on screen
to re-install.
Do u know to use Soldering iron...if u know..remove the proccessor from socket then de solder the BIOS batterry and short that two terminals on mother board without connecting the power adapter and battery...do it and re solder the bios battery..this procedure will help u to recover from ur problem..if u dont know then do it with any technician.
×