Laptop dvd player stuck on region 1 need 4 for

It depends if the DVD player is separate to the TV or built into it. Assuming the DVD is a separate unit, it must be region 4 for Australia, unless specified otherwise (on the player's rear panel or in the operation manual). The only types of DVD players/recorders allowable in Australia are region 4, and multi-region. If the player plays region 4 DVDs, but not other regions, there's your answer. A model number and/or brand of the DVD player would help.

Hi, kindly get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__cd45f

I live in Australia and have two Samsung DVD/VCR player recorders, DVD-VR375 and DVD-VR355. I could only play Region 4 DVDs until I pressed DVD, with no DVD in the units, pressed Menu then 76884, then 9, inserted a Region 1 DVd and it played in both units.
Christina Weate

HI

here a couple of site to try out for a region code enter the model of the dvd player and any numbers

DVD Player and Blu-ray Player region codes


DVD HACKS Home - DVD Hacks - UK DVD Player Hack List and Forum



riz.
riz.

Have no disc in the tray
Press the set-up key
Go to system info
Enter 1101
Press OK
Enter Code 0

Let me know if it works

To check the software version and change
region code of your DVD Portable

1. Power ON the DVD player and open the DVD
door
2. Press the “SETUP” button on remote control,
then select the “Preference MENU”
3. Press the remote button in the sequence as
9 -> 6 -> 5 -> 3
4. The LCD display showed the existing region
code. Press (navigation up) or
(navigation down) repeatedly to select the
number from 0 to 6.
5. Refer below table for your region code setting
Region
1=USA
2=Europe
3=Asia Pacific
4=Australia, New Zealand
5=Russia, India
6=China

Select “0” setting = Region Free (confidential)

you have to convert your firmware(dvd) to rpc1

My region 4 SD-890KY came with a region free upgrade disc. I live in Australia. The disk might work for region 4 players only.

Region code hack posted by Tiger1, May 24 2007:

Hi I live in Australia and added this model.



acknowledging: Region code hack posted by ZoidsGodzilla, November 22 2006: for the Samsung DVD-V5600

1. Press the DVD button on your remote (the Samsung logo appears)
2. Press the SUBTITLE button on your remote
3. With your remote enter the code: 76884
4. The current region is displayed on the top left corner of the screen. (e.g. 4)
5. Press 9 on your remote (Region free)
6. Again press the SUBTITLE button on your remote
7. Enjoy the Region free player

If your player is NOT Region 4 by default then you will need to Substitute the Numbers in Step 3 with the ones Below.

Region codes:
RC 1: 2, 9, 3, 3, 4
RC 2: 3, 8, 7, 6, 7 (or 5, 7, 5, 3, 8 )
RC 3: 5, 6, 7, 3, 2
RC 4: 7, 6, 8, 8, 4
RC 5: 5, 3, 8, 1, 4
RC 6: 2, 4, 4, 6, 2

For Example if your Player was Purchased in the usa ( Which is Region 1) then Step 3 would read :-

3. With your remote enter the code: 129334

Have Fun :0)

Dkjr & Tom,

Check http://www.videohelp.com/dvdhacks/sony-dvp-fx810/7126. The best I´ve found.

Roberto.