Printing I have the Lexmark all In one 1200 printer, my problem is that when I try to print a page that has color words on it , my printer will not pick up what is written, why? is it doing this and how can it be solved. Thank you, Lucy

you need google docs drivers for the printer
or windows 365

Hi, can you provide a little more detail as what you mean by bottom page cut off?
Are you saying that the printer is not printing the last part of the page?

Make sure that you are inserting only genuine Lexmark cartridges in your printer. Removing then re-inserting the color cartridge into the printer is a quick to minor cartridge communication issues.
Make sure that your color cartridge still has substantial ink level for printing using the Lexmark Solution Center software on your computer.
Click Start > Programs > Lexmark X74-X75 > Lexmark X74-X75 Solution Center. Check the ink levels.
If color ink level is still good, then it probably just needs some cleaning. Print quality issues can be due to dirty or clogged print cartridge nozzles. From the Maintenance tab in the Lexmark X74-X75 Solution Center, click Clean print nozzles to fix horizontal streaks. Your printer will then print a test page. Try to print a color page again to verify that the problem with the blue color is fixed.
If the problem continues, try to insert a different known working color cartridge to identify if it's a faulty cartridge issue.

It could be that the cartridge has become dry.
you have to try several head cleans using the printer software and if that doesnt help then the cartridge needs to be replaced.

You may have to change the communication format called the "Spool format."

Please follow the steps given below to change the spool data format:

1. Click on "Start," "Control Panel," "Hardware and Sound" and "Printers."
2. Then, right click on the Lexmark printer icon and left click "Properties."
3. Either on the "Advanced" tab or the "General" tab for some models, there is a "Print Processor" button, left click it.
4. This is the spool format setting. Under "Print processor" it should be set to "Lexmark 1200 series print processor." Next, under "Default datatype," select "NT EMF 1.008."
5. Click "OK" and exit back out to your desktop.
6. Please try printing again.
If this does not help the situation, please describe any differences it does make.

have you tried printing alignment page after you installed a new ink or cartridges if you did not try to print an alignment page first

i dont know how to conect lexmark printer X4250 to my computer

How long ago did color print correctly? If it is more than two weeks your cartridge has dried out and must be replaced. A test page including all colors and black is included in lexmark and dell printer programs. It should be run every week minimum and daily in hot, dry environments.

qwester1

just a wild guess. it may not be capable of printing in color.
check if you indeed have color cartridges installed.

it says B/W - Black and White.
http://www.dooyoo.co.uk/laser-printer/lexmark-t630/
escription: Model ID 0010G0110 / Lexmark T630 - Printer - B/W - laser - Legal, A4, A4 Long - 1200 dpi x 1200 dpi - up to 35.1 ppm - capacity: 350 sheets - parallel, USB

check the cable connections and re-install the driver/software
go to lexmark website and get the latest driver for your operation system.

Also when you print, make sure you are printing to this printer
print from word-pad or any other program OTHER than internet.