Question about Frigidaire GLEQ2152ES Electric Dryer

3 Answers

Frigidaire Electric Dryer error code "dr"

Hi, I have a 4 month old Frigidaire Dryer model #FEQB2152FE0. It now displayes the error code "dr" on the display, beeps 3 times and will not start. I have cleaned all filters and unplugged the unit, but to no avail. Help?

Thanks, John

Posted by on

  • 4 more comments 
  • Miljo Jan 24, 2008

    I don't believe so....it's a Frig/Eureeka model

  • Anonymous Nov 30, 2008

    dr flashes on my frigidaire front load dryer. No one can help us. I have called Frigidaire. You cant talk to anyone. It is always a computer talking. Press 1 for this 2 for this then it tells you to call another number. I called the place we bought it . HA HA they are dumber than a box of rocks.. We asked for some one to come out and fix the dryer. We still havent had any one call us to come out. We will never NEVER buy another product from Frigidaire.

  • malteapor Jan 27, 2009

    My Frigidaire dryer model # GLEQ2152ES0 has the same dr error code. I tried the tech's solution and it didn't work. The door is shut correctly. Any other suggestions? Thanks.

  • cdillet Apr 21, 2009

    I am having the same issue with the dr code shown on the digital display. It will not turn on with any setting other than 20 mins low heat. This code is not explained in the user manual

  • robert samples May 11, 2010

    is that an affinty model drier

  • Anonymous Mar 31, 2014

    Dryer will not stop beeping

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

Try pressing options and select for ten seconds loc shouls come on then do it again to turn it off also check to see if the door is closing properly and that the door switch is closing and let me know i cant find no dr code so i dont think an error code i suspect it has something to do with the door closing

Posted on Jan 24, 2008

  • jpdavis756
    jpdavis756 Jul 16, 2012

    I had the same problem with my frigidaire dryer and I tried everything and called technicians for help. They wanted to charge me $90.00 just to walk in the door and thats before any work was done. If your dryer is under warrenty call the place where you purchased the dryer and have them come out. Don't mess with any of the solution posted on this site because it is a bad control board. If your dryer is working it won't be long before it stop completely. If your dryer is out of warrenty go the local appliance parts store and purchase a new control board. It will cost around $170.00 and you can replace it yourself. It will take you about 15 minutes and you only need a phillips headed screwdriver. Make sure you take the model number of the dryer when you go to purchase the control board.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I just ran the Function test sequence which is in the Dryer Tech Data Sheet (this sheet is inside the dryer at the lower right side) and after that the machine is working. I hope this can solve your problems too.

Posted on Jan 10, 2010

  • kiromora Nov 22, 2010

    I have been looking for the mentioned Tech Data Sheet but to find the "Function Test" but i believe I do not have that Data Sheet on my dryer. Can someone explain that this Test Function is about so I can try that on my Dryer??? I have the very same "dr" error and not running behaviour.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

So I'm having the same problem and thank goodness I bought the extended warranty. I called customer service this morning and they told me it had something to do with the drain hose(go figure). I still can't get my washer to work so they are going to come out and fix it.

Posted on Dec 17, 2009

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire gallery error code f9


How do I reset an F9 on Frigidaire oven? ' ShopYourWay

www.shopyourway.com > Manage My Life > Questions
Oct 26, 2009 - My Frigidaire oven, model feb24s5asb, door is locked and says f9. The door locked is beeping, I need code to know what the code means and how to unlock it.How do I reset an f9, door ... F-9 Error Possible causes: Door motor failure/jammed. Latch motor switch failure. ... Frigidaire Ovens Gallery 30 in.

F9 Error Code - Can't get it to stop beeping - Appliance Repair Forum

forum.appliancepartspros.com/.../400915-f9-error-code-cant-get-stop-be...
Jan 9, 2012 - 6 posts - ‎5 authors After that it flashed betwed F9 and dr and won't stop beeping. ... say that the last time I used the self clean, the dorr would not unlock and I got similar error codes. ...Frigidaire BFEF374EB1 Frigidaire Canada/electric Range Frigidaire Door Lock F9 error code and now F1
1 post
Dec 6, 2010
Frigidaire Door Lock and F9 error code
2 posts
Jul 10, 2010
Frigidaire Error Code F20 - Upon Cleaning
9 posts
Dec 3, 2008
Frigidaire error F-9
4 posts
Feb 18, 2008
More results from forum.appliancepartspros.com

Oct 29, 2015 | Toaster Ovens

6 Answers

Dead


Hi

THe most common beeps that you will encounter 95% of the time in repairing PC's are:

1 beep - computer ok
continous beeps / long beeps - memory error
continous short beeps - bios boot block/corrupted bios
1 long beep followed by 3 short beeps - video card error


or this might help

you can check out this list



AMI BIOS

1 short - Computer ok
2 short - RAM failure
3 short - Parity RAM failure
4 short - System timer failure
5 short - Motherboard failure
6 short - Keyboard controller error
7 short - CPU failure
8 short - Video RAM failure
9 short - ROM BIOS error
10 short - CMOS read/write error
11 short - Cache RAM error
1 short, 3 long - Memory failure
1 short, 8 long - Video adapter failure

Check board/chipset makers website for more infomation.

AWARD BIOS

1 long - Memory error
1 long, 2 short - Video error
1 long, 3 short - Video failure
Continuous beeps - Memory or video failure

note that AWARD relies on motherboard manufacturers to develop their own beep codes - the above are only their own internal codes. You will need to refer to your own manual for an explanation of precise codes.


Standard IBM beep codes.

No beep - Power supply or motherboard failure
1 short - System is ok
2 short - POST error (code displayed on screen)
Repeating short - Motherboard failure
1 long, 1 short - Motherboard failure
1 long, 2 short - Video display adapter failure
1 long, 3 short - Video display adapter error
3 long - Keyboard error


Pheonix beep codes

1-1-3 CMOS memory failure
1-1-4 BIOS failure
1-2-1 System timer error
1-2-2 Motherboard error
1-2-3 Motherboard error
1-3-1 Motherboard error
1-4-1 Motherboard error
1-4-2 Memory error
2-x-x Memory failure (any number of other beeps)
3-1-x Chipset error (any number of other beeps)
3-2-4 Keyboard controller error
3-3-4 Video adapter failure
4-2-4 Expansion card failure
4-3-4 Time of day clock failure
4-4-1 Serial port error
4-4-2 Parallel port error
4-4-3 Math co-processor error


pls rate as fixya if it helps. thanks

Jul 04, 2008 | Acer Aspire 5100 Notebook

1 Answer

I have a Frigidaire front loader washer model number LTF7000EGO and it was washing fine then started a beeping noise with dr flashing. What does that mean?


Hello friend, thank you for your post!

I understand that your Frigidaire washer, LTF7000EG0, is displaying a "DR" error code. "DR" stands for door which means a problem with your door it could be an issue with the door latch assembly or door strike. I would suggest resetting your washer and you can do that by unplugging the power cord or flipping the household circuit breaker for ten minutes.

If you continue to experience an issue with the error code "DR" I would recommend reaching out to a professional technician for proper diagnosis and repair. I hope this information has been helpful. -Matt

Oct 09, 2014 | Washing Machines

1 Answer

DR code on display


When I push the start button on my Fridgedare dryer model
gleq2152es it makes a click and E9E appears on the display
sceen.

Mar 15, 2011 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Frigidaire electric dryer GLEQ2152ES1. Dryer starts for a few minutes then turns off displaying a code of dr on the display screen. What is it and how do I fix it. Also need all the codes or where to get...


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor going bad...

Here are a couple of tips that I wrote will help you to figure out why your dryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Aug 24, 2010 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Error code DR


Pull the tech sheet out of the dryer ( behind the lower front access panal ). The lights flashing are trying to tell you a fault code.

A copy:

MODEL DIFFERENCES: • Better models have a digital readout display
• Good models do not have a digital readout display
READING ERROR CODES 1. Position cycle selector knob to the 3 O’clock position.
2. Press and hold the Select and Pause Cancel buttons simultaneously for six seconds.
3. Immediately after, press and hold the START and Pause Cancel buttons simultaneously for 4 seconds.
4. Rotate the cycle selector knob to the 2 O’clock position.
On better model dryers, the error code will appear in the digital display. On good models, the five indicator lights of
Drying, Cool Down, Wrinkle Rid, and Clean Lint Filter Spin will flash the number of times for the first digit of the code
and the START indicator light will flash the number of times for the second digit. Take separate counts of each indicator
light, then repeat to confirm in order to be accurate in identifying the proper error code. The code is obtained by counting
the number of times the lights flash. Example E24: The five indicator lights would flash twice indicating the 2 and the
START indicator light will flash four times indicating the 4. The five indicator lights and the START indicator light start
flashing at the same time. The control will pause for 2 seconds, then repeat the code.
Note: A letter appearing in the code stands for a number higher than nine.
A = 10 B = 11 C = 12 D = 13 E = 14 F = 15
Example Code E4A: the first digit would be 4 and the second digit would be 10. If this code would appear on a dryer in
the Good model line, the five indicator lights would blink four times and the START indicator light would blink ten times.
Troubleshoot problem by using chart below.
To move on to the next code, press the OPTIONS button. To clear code, press the Select button.
To exit this mode, simultaneously press and hold the Select and Pause Cancel buttons for six seconds.

jeff.
__________________
http://www.applianceaid.com/
Appliance Repair Aid
http://www.jrappliance.ca
JRAppliance

Jan 10, 2008 | Frigidaire AEQ7000ES Dryer

2 Answers

3 beeps mean what


If the only thing that happens is three rapid beeps when you select a feature from the console this is usually a symptom of a defective door switch.  The door switch must be closed to complete the circuit from the timer to the heating circuit and drive motor.  If the switch is bad, or the wiring is broken, the dryer will not run.

Oct 17, 2007 | Kenmore 62062 Electric Dryer

1 Answer

Dryer turns itself on & beeps, then off again


aye, see if you can enter the diagnosis mode. What we are looking for is the F-02 code. This will flash when there is a stuck button or user interface problem and only displayed in the test mode. With the unit plugged in and all indicator lights off, select any button except stop. Press for 3 seconds, release for 3 seconds, press for 3 seconds, release for 3 secnds and press for 3 seconds. If you did it right 88 should appear. Press the same button again and if there is a error, it should show up. If no error code shows, open the consol and check the p-5 connector. This will be the interface ribbon to the board. Reseat it and see if the problem stops. Catriver

Jul 16, 2007 | Kenmore 67082 Electric Dryer

Not finding what you are looking for?
Frigidaire GLEQ2152ES Electric Dryer Logo

4,393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Donni Steen

Level 3 Expert

687 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...