The device can not be detected on my computer

Does you new blue tooth device appear on other device or not. Reset you iphone setting and then again try to detect your new bluetooth device. Also check your bluetooth setting on your iphone to. Here is how to fix computer does not detect iphone or ipod
http://ipodtips-tricks.blogspot.in/2016/04/ipod-touch-does-not-detected-by-computer.html

Hi Shooby

When you say the device is not getting detected in the computer. Then i'd say first check for the latest firmware version in the device. I suppose the latest firmware for R devices is 01.02.165.
Also please check for the WMP version, it should be 10.

Please check whether the device is detecting in My Computer and Windows Media Player.
==================================================================
If the device is detecting in My Computer but not in Windows Media Player, then you need to run the HOT FIX which is available from the microsoft website.

Link is : http://support.microsoft.com/kb/939211

If the device is not getting detected in the My Computer, then you need to check for the MTP driver update. If you want to update the MTP drivers, make sure the device should be in PFS (Plays For Sure). In order to check for the settings, Press MENU, go to SETTINGS, go to USB MODE there you will find PFS or RHAPSODY.

After you update the drivers please unplug and restart the computer. Once the computer is restarted connect the device and it will pop up the message and follow the on screen instruction.

Still if you have any issues please revert.

try to connect it to different USB port.if your smart bro is not detected again, unplug the device(smart bro), uninstall the features of the smart broadband, restart your computer, after the loading of windows plug your smart bro now and wait for it to detect, after 5mins and your computer doesnt detect your device then repeat the uninstallation of your smart broadband application and reinstall also your Universal Serial Bus Controllers and restart. nagkaganyan na din ung smart bro ko.

If the computer cannot Bootup with an error message that hard drive nor detected or no boot device then you could have a faulty hard disk.
Go into the BIOS configuration and see if the BIOS detects the hard disk. If it is not detected then it is probably faulty.
Next reset the ATA data cable on the hard drive and at the motherboard. Bootup the computer again, also check the BIOS configuration again to see if it detects the hard drive.
If it still does not find the hard drive then remove the hard drive and connect it to an USB hard drive adapter and plug it into a working computer's USB port. If this computer does not detect it as an external hard drive then this proves the hard drive is faulty.
To get your computer working again, replace the hard drive and install Windows together with the device drivers and your programs.

The BIOS will have trouble detecting faulty IDE devices, eg the hard disk etc.
To check if the IDE devices are faulty, connect the hard disk to an USB hard disk adapter and plug it into a working computer's USB port, if the computer detects it as an external hard drive and you can open the folders and files then the hard drive is OK and the fault is the disk controller. If the hard disk is not detected then it is faulty and a new hard disk is needed, Windows installed on the new hard drive together with the device drivers and your programs to get an fully functioning computer again.

A camera icon will show up at the bottom of your My Resources in MioNet. If the camera does not appear, then a manual scan is required. To scan for a new camera, go to the MioNet application, select File, then click "Scan for Cameras and new Devices…" MioNet will report any changes in the computer configuration.

If the camera isn't detected and an icon is not available, then there may be two devices interfering with a scan:

1. Built-in webcam: MioNet does not support built-in webcams. This device should be disabled in Windows Device Manager, the computer rebooted, and a new "Scan for Cameras and new Devices…" performed with the USB webcam. Once the USB webcam is detected by MioNet, the onboard webcam can be re-enabled and the computer rebooted.

2. TV tuner card: MioNet also does not support TV tuner cards. This device should be disabled in Windows Device Manager, the computer rebooted, and a new "Scan for Cameras and new Devices…" performed with the USB webcam. Once the USB webcam is detected by MioNet, the TV tuner card can be re-enabled and the computer rebooted.

3. If the camera is being used by another program, MioNet will not be able to detect it. Please confirm no other program, including the camera view in Windows control panel, is not using the camera.

Yes! That is, if you are certain that the device has no malware or virus on it! Shut the computer down completely (power off). Then connect your device and reboot the computer. It should then recognize your device.

Is your drive getting detected in your computer ?

If no then go to control panel and add hardware to get it detected .

pen drives generally have 3 to 5 years warranty, if your pen drives are not detectng on other systems also, its better to replace it

run device manager and remove all aunknown device, specially usb storage device..then restart the computer