Question about Office Equipment & Supplies

1 Answer

Xerox 6204 error 071-103

I'm getting an error code of 071-103 which talks about the delay in the cutter. Have any of you heard of this code?

Posted by on

  • Anonymous Mar 13, 2014

    What does 077-302 error mean on a xerox 6204 plotter



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

The cutter assy has a disk with hole in it to tell the circuit board how fast it is turning and where it is in respect to the home position. It may be that this disk or the sensor that looks through it has a lot of paper dust on it and not able to read correctly. It may me the the cutter itself is sticking and needs a little cleaning and oiling.

Posted on Feb 10, 2008


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

The thread cutter on my janome 7700 is stuck and clacking, then gives me an #4 error and locks up the machine can I fix it?

I have the 8200. It’s because of fluff/thread caught in the cogs that drive the thread cutter. If you slide off your accessory tray, take off your needle plate and from the rear of free arm section remove the 2 screws there (see photo) The plastic top cover will I click and lift/slide off (gently). If you look from the end under the metal plate you can see 2 plastic cogs (wish I’d taken a photo) - the smaller black one will be jammed with fluff or thread. I turned if gently with my screw driver and brushed and scrubbed with a pipe cleaner every time I turned it. Lots of fluff came out. Plugged it in and turned it on .. it worked as normal. Good luck.

Feb 27, 2015 | Janome Sewing Machines

1 Answer

What does a 5h code indicate

The GE dishwasher error codes I have seen start with a letter (usually "C") not a number. I suspect that this isn't an error, but an indication that you have activated the system to delay starting the dishwasher. I believe 5h represents a 5 hour delay. Pressing the "Delay" button should cycle through the different selections and eventually bring it back to Zero.

Feb 07, 2015 | GE Dishwashers

1 Answer

How to get error codes

With the dryer OFF Press the following sequence of buttons My Cycle - Delay Start-My Cycle - Delay Start . Menu will come up. Scroll down to Error codes and select. Scroll using arrows through error codes

Mar 26, 2014 | General Electric Profile DPVH890EJWW 7.5...

1 Answer

A17-209 error message

A-17-209 is a cutter error meaning the cutter is not at home position when master material is in place. The cutter can be manually slide towards front of machine or another way is to rerolled master paper back on to its roll and close the clamp. This will cause the cutter, if operational, to re-home itself correctly. There are test codes to operate cutter to check it (480).

Nov 07, 2013 | Riso RZ220 Duplicator

2 Answers

How to get the verification number for kakao talk

I also have the same problem. I was using it before but my daughter accidentally uninstalled it. I've tried downloading again but i couldn't connect anymore.

Mar 12, 2013 | KakaoTalk

4 Answers


Hi I have the error code ho2 on my Hoover wash machine does any one no what it means

Oct 21, 2012 | Washing Machines

1 Answer

Hello i have a problem with my nokia 3110c whitch is : when i flash my phone with phoenix i got this result : Flashing started Creating product data items list Product data items list created Backup...

Now what is the condition of the phone ? If the phone has still problem, uninstall the previous file you have installed and re-install this one3110c file.Select the product code 0544311 or 0556977.This two files can use universal.Use fully charge battery or insert charger when message prompt.I hope there will be no error.Thanks good luck.

Aug 16, 2011 | Nokia N70 Cellular Phone

1 Answer

My zebra 4M+ get me a cutter jammed status

Sometimes debris builds up in the bottom of the cutter assembly preventing the cutter from going all the down. There is a switch inside the cutter which trips the "jammed" error if the cutter can't go all the way down. The cutter can be removed and disassembled to remove the problem. Caution should be exercised. There are washers and springs on the cutter face plate guide screws which have to be removed.

Mar 26, 2009 | Zebra Z4M Printer

1 Answer

Error code

you have set it to start after a one hour delay- just press the start delay button until it cycles through past 24h and you will get back to the immediate start mode...

Oct 12, 2008 | GE 24 in. Profile PDW9280JSS Built-in...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

689 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

2239 Answers


Level 3 Expert

13434 Answers


Level 3 Expert

85206 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides