Router help!!! i connected my router but now i cant access the internet from my pc it says error phone line is busy

I'm not aware of any problem with the DGN2000 that only lets you connect 1 computer (If it was I dont think they would sell many and EVERYBODY would know about it)

Anyway - try swapping the network leads over (remember which port is the "live" one) does the other PC now have internet access and the 1st one not?

if the 2nd pc DOES have internet access the yes you have a suspect router.
if the 1st computer DOESN'T have Internet access you have suspect router.

if the 2nd pc DOESN't have internet access but the 1st pc DOES - then the problem is something on the 2nd pc.

Hope this helps.

Hello emanuelav716, Your router does not need to be connected to a phone line. However is does need to be connected to a cable or DSL modem if you want internet access. If you are just looking for a network inside your home or business the router can be setup that way. Please reply with any other questions or rate this solution if you found it helpful. Thanks! Edward

please visit my profile bro. coz i posted there some tips about routers configuration and internet connection errors. here's the URL: http://fixya.com/users/chael890

Westell makes a line of broadband home networking products that enable residential customers and users in small businesses to access and share broadband services. These inexpensive DSL router/modems offer multi-users Internet LAN access for home or business applications. The Westell router/modems allow you to have the benefits of the "always on" high-speed broadband Internet connection without losing the ability to receive voice calls over the same phone line.

1. Step 1 Connect one end of the Ethernet cable to the computer's Ethernet port. Connect the other end to the Ethernet port on the back of the Westell router.
   
2. Step 2 Connect the barrel end of the router's power cord to the connector labeled "12 v" on the back of the router. Plug the other end of the power cord into a wall outlet.
   
3. Step 3 Connect one end of the DSL phone cable to the DSL line jack on the back of the router. Connect the other end to the wall jack.
   
4. Step 4 Wait for the Ready and the Link LEDs to glow steady green. The router is now ready to use.
   

How to connect....

1- Two Computers:

# We are connect two computers together to share Internet, printer, scanner, files, and even programs

We can do it through either way:

1- Use A Crossover Cable And Two Network Cards.Two network cards are installed in two computers.Then use crossover cable to connect them.

2- Use a Phone Line and Two Special Adapters Sold as "Phone line network Kit". Two adapters are installed in two computers. Then use existing Phone line to connect them.

Connecting Two Computers Wirelessly:

1- Wi-Fi
2- Bluetooth
3- Infrared

Several types of fixtures exist for home networking:

1- Hubs
2- Switches
3- Routers

2- Computer with the internet

Before you can connect to the Internet and access the World Wide Web, you need to have certain equipment. In brief, you must have:

-A computer (preferably running an up-to-date operating system); -
-A modem and access to a telephone line or a local area network (LAN) that is in turn connected to the Internet; and connection software that will allow you to establish an account with a service provider and access the Internet

You Need:

Modem: This converts your digital computer information into analogue telephone signals. Phone Line: his may be your biggest expense after the equipment.

Internet Service Provider (ISP): ISP has a permanent connection to the Internet.

ADSL: a newly standardized transmission technology facilitating simultaneous use of normal telephone services, data transmission of 6 Mbit/s in the downstream and Basic-rate Access (BRA).

ADSL facilitates the simultaneous use of normal telephone services, ISDN, and high speed data transmission.

Another advantage of having an ADSL line is not missing calls while you're online, as both voice and data can be transferred at the same time.

Try this... power down your modem, router, pc and imac, then power up in this exact order, modem first, then router then the computers and see if that works for you...Hope this helps!!

--Joshua79

Check with this tip
Detail on this Wlan Router
"Connect power cord to router.

Wall Plate -> Router (using phone cord).

Router -> PC (using network cable).

1. Power on router, when the lights settle, start the PC.
2. Start IE in PC, type 192.168.1.254 in the address bar and press enter.
   
3. Start configuring using the Telco's suplied info, namely PPPoE username and password. All other function works by default.
   
4. The WEP key is the 10 digit number underneath the router (not the 12 digits S/N number).

1. USB modem is connecting a PC USB port with a DSL phone line: CANNOT be connected to a ROUTER LAN (ethernet NOT USB port).
2. Wireless ROUTER is NOT a modem and it CANNOT connect the Internet (or WAN) LAN port to any "phone line"
3. Connect the Router Internet (WAN) port to Modem (you need a LAN MODEM = a modem with a LAN/ETHERNET port)
4. Be sure your internet is running before strting ROUTER configuration with Router Company CD
   

If you have phone (DSL_ the phone must be connected to the modem of DSL, then connect the ethernet cable from the modem to the wireless router or router (use the jack WAN) and then from the modem (connect the cable into port # 1) goes to your PC into your ethernet card.

You have to access to your router and set your network (you have to put the data of your internet connection gave to you by your internet provider (usually is your email address and your pass)

You can get more help here:

http://www.microsoft.com/athome/moredone/wirelesssetup.mspx


If you have a wireless network Then do this:

Setting wireless network on Win XP
Click your Start Button
Select and click Control Panel
Select Network Connections
Select Wireless Network Connections
Right click
Select View Available Wireless Networks
5. Highlight the network you want to connect to
Click Advanced
6. Select the wireless network tab
7. Highlight the network in the available networks window
9. Click configure
9. IN the Properties Window
Double check the SSID (network name)
Enter the WEP KEY provided to you by the office
Click OK

it will as long as the modem/router is connected to a phone line, instead of the pc, the only cable connected to the pc should be a ethernet cable; or you have the pc networking set that it connects via another pc instead of through a gateway, re run the wireless network wizard.