Hello there,
Is It Possible To transfer video from a handycan (Sony DCR-TRV 140E)
By Using USB cable?????????????????
If "yes" Please Tell Me The Directions to do it
Thanx All
Pixela image maker will do the job
Yes got to sony
http://support.sony-europe.com/dime/camcorders/camcorders.aspx?site=odw_en_GB
pick your camera at the bottom, get the USB drivers and that should do. Programs it will work with include Pinnacle Studio etc
Goto sony site and download the USB driver for Win XP /2000
link http://esupport.sony.com/US/perl/swu-download.pl?upd_id=1452&mdl=DCRTRV140
and then you can connect USB cable. The camera will show up as device icon when connected under my computer. I am not sure of Windows 7 driver is available. It should work in Win 7 using compatibility mode.
digicam freak
The USB streaming driver for the Camcorder is not available
for Windows 7 OS from Sony at this point. Hence it is not possible to transfer
videos using USB interface. You may use i.LINK or A/V interface to transfer
videos from the Camcorder to the Computer which is running on Windows 7
Operating System.
Please
follow the steps to transfer video to a computer using an i.LINK connection
(IEEE 1394).
IMPORTANT: Video capture software and a compatible video capture card must
be installed on the computer. Depending on the computer manufacturer, various
video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft
Windows Movie Maker, etc.) may be available or already installed on your
computer. If necessary, contact the manufacturer of your computer for further
information.
NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate
Plus software for video capturing. Some VAIO computers also include Click To
DVD software that will allow video capture to the computer hard drive or
directly to a DVD.
i.LINK
Cable.
i.LINK
port.
NOTE: The computer i.LINK ports and capture cards
may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK
ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will
be necessary to use a 4-pin to 6-pin i.LINK cable.
It should now be possible to copy the video using
the video capture software if the computer hardware and software are configured
correctly.
1,389 views
Usually answered in minutes!
I try to use the sony image mixer program,but could not get connection to the camcorder.
driver download
CANNOT TRANSFER VIDEO TO PC
i use usb cable but is says i need a program to put it on. what is the program.
WHERE I CAN FIND THE DRIVERS FO USB DEVICE
Drive
DCR-TRV140E Digital-8 Digital
×