Unplug then replug. Works every time.
What brand is your voicemail system? Are there other phones on the system still working? Have you tried to reboot the voicemail system yet? We have a starmail and once a year or so I'll have a phone do what you secribe and all I do is shutdown the voicemail side (leave the nortel box alone) and turn it back on. That usually solves the problem. You may have accidently deleted the mailbox to. If you have another phone, go into the admin and be sure the box in question is still active in the system memory.
As for AA...Did it get turned off? Do you program it from the phone or thru a PC? It sounds like all your troubles are in the voicemail system so I would definitely reboot it and post again with what happens.
I assume you have your phone equipment all together in a safe place...You should have at least two boxes on the wall. One is a nortel box for the phone system, the other is a voicemail system. Mine is a Starmail, your is whatever...
The first thing is to verify your voicemail system is still on. A power issue could have easily cooked the little power converter that plugs into the wall.
If you enter Feature 986 (or is it 983, I forget) can you get to the voicemail login?
If not, replace the power supply. If so, look into the programming.
×
Hi,
1) Try Feature 903. If this shows "inactive feature" as well, you will need to power down the Flash.
2) Power the Flash up and wait 10 minutes for it to adjust.
3) After 10 minutes, enter Feature 903. Select "next" on the display.
When the display shows f980-f989, select "ok." This will allow you to
use the high feature codes of the Flash Voice Mail.
4) Enter Feature 983. If it has a "PSWD" prompt, you will need to enter
266344 as the password. Follow the options to choose languages and
complete a basic configuration. If you receive a "LOG" prompt, enter
1020000 if you have a 3-digit DN or 120000 if you have a 2-digit DN.
5) Once you have completed these steps, you will be able to access the Flash Voice Mail programming.
Let me know, if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Hello! It would appear that feature #981 (open your mailbox) is not programed. The Administrative access code is:
Feature ***23646 (password)...Which is ADMIN=23646.
You may have the Compact ICS or the OX32 unit; Which in this case is...Feature***22742 (password)...Which is BASIC=22742.
If the feature is programed then...Press feature button...Then 981 2.
If you have any questions I will be more then happy to assist you;
Just write a comment and I'll respond.
Guru....................saailer
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
1,085 views
Usually answered in minutes!
feature 903 also shows inactive feature. How do you power down the flash? I have tried pulling the power to the unit and repowering but that didn't help. Thanks, Bill
I had asked for a clarification on the last advice, but have had no response. Part of the last answer said to power down the flash? I'm not sure what this or how to do it.
I tried that before asking the first question, but did it again earlier tonight. I unplugged for a half hour and then replugged, waited 15 minutes and tried to feature 981 and feature 903.....still says inactive feature.
We haven't done anything to the system, but did have a power failure around the same time we noticed that it stopped working. The auto attendent doesn't answer at all. We have 7 phones on the system and the voicemail isn't working on any of them. I don't know how to reboot the answering portion separately, but I have tried rebooting the entire system several times.
×