Question about 2wire (1000-000005-002) 802.11g/b Wireless Adapter

1 Answer

Wireless question how do i set up a wireless net ? can i set up network tepology in wireless mode. ikilima

Posted by on

  • Anonymous Feb 06, 2008

    i have a base station but can not get the lap top with wire less to find 2 wire

  • Anonymous May 11, 2010

    Could you please give little more information on your requirement.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

There are two types of wireless network.1), infrastructure mode 2. adhoc mode.

there are some information wireless networking
http://www.home-network-help.com/wireless-network.html

http://www.microsoft.com/athome/moredone/wirelesssetup.mspx

http://www.oreillynet.com/wireless/2003/03/21/home_wifi.html?page=2

Posted on Jan 28, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is router


Basic steps to configure your router:
  1. Set Up IP Address and Sub-net Mask for their router.
  2. Now open the router Web Page by 192.168.0.1 in the browser URL.
  3. Login with your User Name and Password.
  4. For Manuall Configuration and Set-up router according to your ISP.
Router have different configuration according to Model. for more router support http://support.dlink.com/ and any router related technical support D-Link Router Support .

May 26, 2014 | D-Link Computers & Internet

1 Answer

How to set up password for internet


Hi,

Welcome to Fixya.
If you want to set a passowrd (Passphrase) we can access the Wireless Settings Page of the router to obtain the information needed.

To access the router page you need a working computer that is connected to the router. To access your router you need to use a computer that is connected to it. Open a Browser then type 192.168.0.1 or http://routerlogin.net. The Default username is admin and the password is password. Password is case sensitive.

Go to the Wireless Tab select Wireless Security you can set a security either WEP, WPA, or WPA2 and under the Security Mode you will see there Network Key (Wep/Wpa Key) or Passphrase. The Network Key serves as a password or security code on your network to make it secure. Network Key is case sensitive.

Don't forget to say thanks. Thanks for using Fixya

Mar 16, 2011 | NetGear WGR614 Wireless Router

1 Answer

Im programing my x box 360 it needs me to program the wpa net work to get this new x bow to work. im new at this expain things very clear , thanks


Follow these instructions to set up the Xbox or Xbox 360 connections to a wireless home network. These instructions assume the wireless router is already installed with a working Internet connection. If after following these instructions you are unable to network your Xbox with the wireless router, see - Connecting Xbox to Wireless Networks - Why Things Go Wrong



Here's How:
  1. Connect the appropriate wireless network adapter to the console. On the Xbox, a Wi-Fi adapter that connects to the Ethernet port (sometimes also called a wireless network bridge) must be used. Alternatively, the Xbox 360 is also designed to work with certain Wi-Fi game adapters that connect to a USB port.

  2. Turn on the console and navigate to the wireless settings screen. On the Xbox, the menu path is "Settings -> Network Settings -> Advanced -> Wireless -> Settings" On the Xbox 360, the menu path is "System -> Network Settings -> Edit Settings."

  3. Set the SSID (network name) on the Xbox to match that of the wireless router. If your wireless router has enabled SSID broadcast, the SSID name should appear pre-selected on the Xbox display. Otherwise, select the "Specify Unlisted Network" option and enter the SSID there.

  4. Specify "Infrastructure" as the Network Mode. (Infrastructure is the mode used by wireless routers.)

  5. Set the Security Type to match that of the wireless router. If your router uses WPA encryption and the type of adapter connected to the Xbox does not support WPA, you will need to change your router settings to use WEP encryption instead. Note that the standard Microsoft Xbox 360 Wireless Network Adapter supports WPA while the standard Microsoft Xbox Wireless Adapter (MN-740) only supports WEP.
  6. Save your settings and verify the network is functional.

    On the Xbox, the Wireless Status screen displays whether a connection has successfully been made with the wireless router, and the Connect Status screen displays whether a connection has successfully been made through the Internet to Xbox Live.

    On the Xbox 360, use the "Test Xbox Live Connection" option instead.
Tips:
  1. Even when your wireless connection between the Xbox and the router is working perfectly, you may still experience difficulty connecting to Xbox Live. These issues can be caused by the quality of your Internet connection or the firewall and Network Address Translation (NAT) settings of your wireless router. Additional troubleshooting may be required in these areas to achieve reliable Xbox Live connections.

Feb 27, 2011 | Computers & Internet

1 Answer

How to reset user ID and Password For Wireless Internet




Follow the steps as if you are doing the basic wireless connectivity setup:

1. Log in to the Router by going to http://www.routerlogin.net or http://www.routerlogin.com

and entering the default user name admin and default password password, or using whatever

LAN address and password you have set up.

2. Select Wireless Settings under Setup in the main menu to display the Wireless Settings

screen.

3. Select the region in which the wireless interface will operate.

4. Set up the 2.4 GHz wireless network:

a. Enter the SSID name. The default is NETGEAR.

b. Select the operating channel for the wireless mode. The default is Auto. When Auto is

selected, the router finds the best operating channel available.

If you notice interference from nearby devices, you can select a different channel.

Channels 1, 6, and 11 will not interfere with each other.

c. Leave the wireless mode set to the default setting of Up to 145Mbps for 2.4GHz.

5. Select security options for the 2.4GHz wireless network.

The wireless Security Options are set to None by default. NETGEAR strongly recommends

that you use wireless security. You can select a different Security Option and a different

passphrase for each wireless network. For the highest performance of the 2.4GHz wireless

network and the most secure encryption, NETGEAR recommends that you use WPA2-PSK as your security option.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Feb 12, 2011 | NetGear WNDR3400 N600 Wireless Dual Band...

1 Answer

Dont know wpa number


Hi,

Welcome to Fixya. If you want to obtain the WPA or Network Key on your router you need to access the Wireless Settings Page. To access the router page you need a working computer that is connected to the router. To access your router you need to use a computer that is connected to it. Open a Browser then type 192.168.0.1 or http://routerlogin.net. The Default username is admin and the password is password. Password is case sensitive.

Go to the Wireless Tab select Wireless Security under the Security Mode you will see there Network Key or Passphrase. The Network Key serves as a password or security code on your network to make it secure.

Thanks for using Fixya.

Feb 07, 2011 | NetGear WGR614 Wireless Router

2 Answers

How to use dual band on router?


You can only use it in the 2.4 ghz mode or the 5 ghz mode:

1. Log in to the Router by going to http://www.routerlogin.net or http://www.routerlogin.com

and entering the default user name admin and default password password, or using whatever

LAN address and password you have set up.

2. Select Wireless Settings under Setup in the main menu to display the Wireless Settings

screen.

3. Select the region in which the wireless interface will operate.

4. Set up the 2.4 GHz wireless network:

a. Enter the SSID name. The default is NETGEAR.

b. Select the operating channel for the wireless mode. The default is Auto. When Auto is

selected, the router finds the best operating channel available.

If you notice interference from nearby devices, you can select a different channel.

Channels 1, 6, and 11 will not interfere with each other.

c. Leave the wireless mode set to the default setting of Up to 145Mbps for 2.4GHz.

5. Select security options for the 2.4GHz wireless network.

The wireless Security Options are set to None by default. NETGEAR strongly recommends

that you use wireless security. You can select a different Security Option and a different

passphrase for each wireless network. For the highest performance of the 2.4GHz wireless

network and the most secure encryption, NETGEAR recommends that you use WPA2-PSK as

your security option.

6. Set up the 5GHz wireless network:

a. Enter the SSID name. The default is NETGEAR-5G.

b. Select the operating channel for the wireless mode. The default channel is 36. If there is an

Auto option in the channel list and you select it, the router will find the best operating

channel available.

If you notice interference from nearby devices, you can select a different channel.

c. Leave the wireless mode set to the default setting of Up to 300Mbps for 5GHz.

7. Select security options for the 5 GHz wireless network.

The wireless Security Options are set to None by default. NETGEAR strongly recommends

that you use wireless security. You can select a different Security Option and a different

passphrase for each wireless network. For the highest performance of the 5 GHz wireless

network and the most secure encryption, NETGEAR recommends that you use WPA2-PSK asyour security option.
8. Click Apply to save your changes.

please rate it and give a testimonial for my response

Thanks, Joe




I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Feb 02, 2011 | NetGear WNDR3400 N600 Wireless Dual Band...

1 Answer

How do I set my linksys WRT300N router to infrastructure mode vs adhoc mode? I have a magnavox blu ray player with wireless capability, it says I have to set my wireless router to infrastructure mode vs ad...


http://compnetworking.about.com/cs/wirelessfaqs/f/adhocwireless.htm

http://compnetworking.about.com/cs/wireless/f/infrawireless.htm

Question: What is infrastructure mode in wireless networking? Answer: Infrastructure mode wireless networking bridges (joins) a wireless network to a wired Ethernet network. Infrastructure mode wireless also supports central connection points for WLAN clients. A wireless access point (AP) is required for infrastructure mode wireless networking. To join the WLAN, the AP and all wireless clients must be configured to use the same SSID. The AP is then cabled to the wired network to allow wireless clients access to, for example, Internet connections or printers. Additional APs can be added to the WLAN to increase the reach of the infrastructure and support any number of wireless clients. Compared to the alternative, ad-hoc wireless networks, infrastructure mode networks offer the advantage of scalability, centralized security management and improved reach. The disadvantage of infrastructure wireless networks is simply the additional cost to purchase AP hardware. Note that home wireless routers all feature a built-in AP to support infrastructure mode.

Feb 02, 2011 | Linksys WRT160N Wireless Router

1 Answer

For the last few weeks i haven't always been able to connect to the net,on the few occassions i have no prob! but why can't i always get in? had this notebook for 14 months without a prob. only started...


first i would try moving the switch that is located on the front of the netbook to the right. Once the switch has been moved the wireless networking icon will appear on the screen indicating that it has been enabled.If this doesn't help my next step would be to remove and recreate the wireless network connection by doing the following:
  1. Click on Start, Settings, Control Panel
  2. Open Network Connections
  3. Right-click the wireless network connection, and click Properties
  4. Click the Wireless Networks tab
  5. Under Preferred networks, click the wireless network, and then click Remove
  6. Click View Wireless Networks
  7. Under Network Tasks, click Refresh Network List
  8. Under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect
In Windows, there is a power mode setting for the wireless driver that may also help this issue. Follow the instructions below:
  1. Go to Control Panel, System, click the Hardware tab and select Device Manager.
  2. Click the + next to Network Adapters and double click on the Atheros wireless Network Adapter.
  3. Click on the Advanced tab, select Power Save Mode from the list on the left.
  4. Change the Value on the right to Off.
    The default setting is Maximum, which may cause issues similar to those described.
Check to see if this has resolved the connectivity issue. If it has not, the following steps may need to be completed.
  1. Click on Start, Settings, Control Panel
  2. Open Network Connections
  3. Right-click your wireless network connection, and click Properties
  4. Click the Wireless Networks tab
  5. Under Preferred networks, click the wireless network, and click Properties
  6. Click the Authentication tab, click to clear the "Enable IEEE 802.1X authentication for this network" check box, and then click OK twice if this doesnt help the computer may need service.

Oct 25, 2009 | Acer Aspire One PC Notebook

1 Answer

Cisco aironet 350 - media disconnected


does your laptop have a switch on the side or Fn key (blue icons on the F keys) to turn on/off the wifi.

Sometimes Fn + F2 will toggle the wifi on/off.

Post your make/nodel laptop and OS for more specific advice

I avoid using client utilities with wifi. In the conection "allow windows to manage connection" and see if you can connect

Jul 10, 2008 | Computers & Internet

1 Answer

Linksys


I used to have a Linksys WPC54G. Thia is normal for the LinkSys WPC54G. How ever in your configurations make sure everything is enabled. But as this being a wireless adapter you should make sure you use AdHoc Mode configurations and set it to channel 6 works the best and set it to G-Only mode not mixed..See the network light blinks and it should be flashing fast for it to conect. I had this same problem. I decided to reconfigure my Linksys to AdHoc and it seemed to work better form me. For as the secure links I set them at non secure and I manually set up my IP Address which is 192.168.1.01-255 Sub net mask is 255.255.255.0 Default Gateway is 192.168.1.1 DCHP Server is also 192.168.1.1 I do hope this helps if it doesn't I say try moving your laptop around until your Wireless Network enables. there is always Tech Support on Linksys.com also. Good luck and I hope this works for you.

Feb 06, 2008 | Linksys WPC54G Wireless-G Notebook Adapter...

Not finding what you are looking for?

Open Questions:

See all 2wire (1000-000005-002) 802.11g/b Wireless Adapter Questions

2wire (1000-000005-002) 802.11g/b Wireless Adapter Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Ron Stone

Level 2 Expert

396 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...