Optical driver Hello Expert My Lapto Optical driver is not working properly what can I do for that?

you can install the driver by following this link.
http://accoblobstorageus.blob.core.windows.net/software/01e39fcd-8d7a-403c-96ef-f7534251839d.dmg

Hi three, uninstall the Logitech V220 Cordless optical mouse driver from the laptop and then restart the laptop again. Now install that Logitech V220 Cordless optical mouse driver again . I am sure its will start working. If not then make sure your batter Is properly fixed inside in the mouse & that's fully charged. After those thing if still not working then visit service center, because the mouse censer stop working and its damaged.
Thanks & waiting for your feedback.

hello. follow the link below to get all the vista drivers for your Dell Inspiron 1525 laptop.

http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=INS_PNT_PM_1525&os=WLH&osl=en&catid=&impid=

since you don't have network card working on this lapto try to use some other computer and then save drivers on a flash drive or burn it to a CD to install it on your laptop.

good luck hope this helps,


Kind regards,

Amar Sondhi

Hello,
The lens of your camera has been stuck.
You need to go to Canon authorised service center. They will replace the optical assembly.

OR

You can give it to an expert for repair, he can repair it without replacing the optical assembly.

Check the device status under the Device Manager. if the status of the device was just "drivers were not installed..." you may simply click on update driver button on the same window. If the error is code 10 or device could not start, the problem has something to do with the hardware. call the manufacturer of your laptop and check the warranty if it is still covered.

My same model Argos mouse was auto-detected as a "USB compliant mouse" and it failed to work. Went into device Manager and manually re-installed driver as a "HID compliant mouse" from local drivers and it works!!

Yrs, Mad-****.

The driver for the device would have been corrupted by some incompatible drivers loaded onto your pc lately. It could also be that the device has been mistakenly disabled. If not, disable the device and restart your pc. After it stabilized on the desktop, go back to the Device Manager and enable it again. If nothing still happens, go through Control Panel and remove the driver from installed programs. Shut down your pc and disconnect the device. Leave for about 10 minutes and recoonect and power on the pc, the device should be detected by the pc and then install its drivers. If it doesn't detect the device, it has probably gone bad and should be replaced. Good luck

Try to install all the new drivers from this site

http://www-307.ibm.com/pc/support/site.wss/MIGR-64283.html

i think it will solve this problem. Dont forget to install chipset drivers graphics drivers etc..

Thanks
mohan

I posted a reply in your other new post =) Hope it helps you ..if not just post back into the thread and we will continue to try and solve the issue =)

• look it up on the internet and download