I need drivers for dac 2 controller for pcdj - Visiosonic PCDJ Red Pro DJ Software

Yes, you can get them here

PCDJ Blue and RED 5.2 DJ Software Support Page

PCDJ https://pcdj.com > Support
Technical support page for PCDJ RED and Blue 5.2 dj software. This page includes manuals, links, downloads, tutorial videos and other information relating ...

1- VERIFICA?I DAC? PRIZA ARE LEG?TUR? DE PROTEC?IE, 3 CONTACTE, DAC? ARE TENSIUNE,
INTRODUCE?I UN FIER C?LCAT , VEDE?I DAC? SE APRINDE BECUL DE PREZEN??, SAU DAC? SE ?NC?LZE?TE. DAC? DA, INTRODUCE?I ?TECHERUL ?N PRIZ?,
2 - CONECTA?I MA?INA LA RE?EAUA DE AP?, FIXA?I PROGRAMUL DORIT ?I AP?SA?I BUTONUL DE ON !

UPDATE THE DRIVER
OF THE DEVICE: Digital Audio PCDJ Dac-2 Controller

i need the drivers for a pcdj dac-2

These are difficult units to disassemble - I ended up taking mine to a repair shop and paying about $150 to have both play switches replaced.

Go to this link, http://www.pcdj.com/index.php/products/

1. Select the version you want.

2. Add it to the shopping cart.

3. Checkout

This is not a site to distribute illegal software license keys.

Hasta Luego.

If you want to rip cd's use ashampoo music studio or xilisoft products as alternative as PCDJ is not compatible with all pc's and if you are using vista then on the UAC you need to permit the install or it wont work.

Did you ever figure this out? My Cue/Play buttons have gotten to where they don't react half the time, which is very annoying. I took the screws out of the top plate, hoping it would just come off and then I could clean under the soft-touch buttons, but it didn't. I took the screws out of the side and was able to remove the enclosure, but didn't see an easy way to get to the buttons. (It looks like you have to remove the little "C" clips from the end of the axle which the jog wheels attach to in order to remove them). I just put it back together until I can find more instruction.

download the cd ripping patch. Here's a link: http://www.pcdj.com/support/drivers