Question about Faberware FCP240 Coffee Maker
Hi. You have a 4 cup pot made in China.
The problem is the keep warm element. The reason, your pot perc's and it gets hot near the thermo, the thermo turns off the main element. The keep warm element is not on so after a small amount of time the water cools and the thermo turns the main element back on again, thus making the water hot. The K W element is supposed to be on all the time the pot is plugged in, it is instrumental in perking the first brew making it really hot, the thermo turns off the main element and the K W element keeps the water hot. The K M element is very a easy fix, it is the small looking white rope that runs around the bottom of the pot. You have 1-nut and 1- screw to remove. When removing the screw from the main element you must hold the (leg) that the K M element is screwed to so it does not bend and brake off. Take your time and be firm with the pressure you apply to the screw, while holding it with a pliers, good luck. bobbyone
Posted on Aug 11, 2010
SOURCE: Our Bunn coffee maker has
It sounds like you are missing your sprayhead. If you will call Customer Service at 800-352-2866 with the model we will be able to send you out a new sprayhead.
Posted on Sep 13, 2010
Tips for a great answer:
Jun 10, 2011 | Keurig Platinum B70 Coffee Maker
Aug 18, 2010 | Bunn Pour-Omatic Coffeemaker, 10 Cup White
Jun 08, 2009 | Saeco Vienna Digital Coffee Maker,...
Jun 13, 2008 | Bunn Pour-Omatic Coffeemaker, 10 Cup White
Jun 16, 2010 | Faberware FCP240 Coffee Maker
358 people viewed this question
Usually answered in minutes!
Level 1 Expert
Level 3 Expert
Level 3 Expert
Step 2: Please assign your manual to a product: