Element Electronics FLX3220F 32 in. LCD TV Logo

Question about Element Electronics FLX3220F 32 in. LCD TV

1 Answer

Lost entire picture, sound and everything else OK

Everything working fine, TV is 1 year + 1 week old(purchased black Fri. 2008), then last night, while watching, the screen/picture disapeared completely. The entire screen is now entirely a very dim/dull light blue. Everything else is working fine, sound-powers up and stays on-remote functions work. Current usage/set-up is just basic local reception from rooftop antenna straight into the 75 ohm ant. input. Also checked for picture from DVD player input from Video IN (rca jacks, not comp.)nothing there either. Any tips or troubleshooting help would be appreciated. ELEMENT TV MODEL ELCHS321, 32" LCD 720 HD Also unplugged power cord and reconnected 2 times, no change

Posted by Anonymous on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 210 Answers

Check the invertor boards resistors they power the back lights
also check for any capactors that have blown (raised tops) they look little bateries

Posted on Dec 12, 2009

Testimonial: "Your response was quick pointed me in the right direction I might need help with ID of components to continue"

  • Anonymous Dec 12, 2009

    the invertor boards run down each side at the back of screen on some models have covers over them to test( these are very small) resistor you will need a mulity meter and if read open cuirket replace

    the first place to start looking for blown capactors( raised tops) is on the main power board

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Samsung LED UA40F6400 suddenly lost picture.

The tcon board or the LCD panel is faulty. You have to replace the TCON board to confim the fault.

If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/
1helpful
1answer

Viewsonic N3252W picture ok but no sound

Download the repair book to this TV by net. It will have all details.
0helpful
1answer

I awoke this morning to find the sound on my Apex Digital LD4088 LCD tv is dead. The picture is fine, but sound is dead, how do I solve this?

Download the user manual to your TV. Clik here to download it. See whether audio options to it are set right. If all are right, check its speaker. If speaker is OK, the audio output circuit section should be troubleshooted.
If you feel any difficulty in downloading the manual, send your email address to me. I'll send a copy of it to you by return mail.
0helpful
1answer

I purchased this hdtv new from Best Buy in February 2008. Last week a crackling sound began to develop and now the sound has gone completely, although the picture is fine.

Insignia T.V. 50" Model; NS-PDP50, Plasma T.V.

T.V. comes on, there is sound but no picture.
T.V. is les than 18 months old. We use the T.V. when we come to our Condo in Daytona Beach for vacation, so it hasn't been used very much.
1helpful
1answer

JVC i art 32" flat screen

Does anyone know where can I buy a screen for a 27" LCD Insignia TV. Model is NS-27LCD? My screen creaked. I checked out e-bay and have not found a broken TV with a good screen. Does anyone know where I can buy a screen at. 
Thank you all for you time. 
JC 
88helpful
11answers

Toshiba Regza sound but no picture

I had the same problem last night - sound but no picture form any of the inputs - DVD, VCR, FIOS or antenna. I could still see the TV menu. If you go to the TV menu - you can go to the settings (far right top), from there you can choose to restore factory settings, usually needs a code - 0000 (if you did not choose a different one), select yes when prompted if you want to restore factory defaults. This brought my picture back. I lost all of my picture preferences i had set - but at least I got a picture! I hope this helps!!
Marilyn
0helpful
2answers

No picture, sound ok

Rca has been known to have bad solder joints in the deflection circuits. Usually around the flyback and transformers.. check it over real good. Just be careful as you can still get shocked after the powers removed the capacitors and picture tube will hold a charge in them.
0helpful
1answer

No picture but sound works.....

  • adjust brightness setting when playing tv.
  • adjust screen control located on flyback transformer.
  • hope this will help.
Not finding what you are looking for?

1,047 views

Ask a Question

Usually answered in minutes!

Top Element Electronics Televison & Video Experts

Cindy Wells

Level 3 Expert

6555 Answers

The Knight
The Knight

Level 3 Expert

76851 Answers

Mike

Level 3 Expert

4383 Answers

Are you an Element Electronics Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...