Question about Panasonic Lumix DMC-FZ30 Digital Camera

1 Answer

Shutter speed Panasonic DMC FZ30

According to the manual, I can adjust the shutter speed in Shutter Priority (and Manual) modes up to 1/2000. However, I truly cannot find where this adjustment can be made. The manual even states, "...adjust shutter speed....." Haven't found it anywhere in the Menu Mode. Sports setting goes up to only 1/30. Help!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Set dial to s-then adjust to desired setting using command wheel by thumb.

Posted on Feb 05, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set shutter speed in fuji fine pix S2940


That depends on the exposure mode. In any of the automatic point&shoot modes you have no control over the shutter speed, the camera sets what it thinks is the proper shutter speed. In the P (Program AE) mode you can adjust the shutter speed by pressing the +/- button. In the S (Shutter Priority) and M (Manual) modes you control the shutter speed by pressing the +/- button and then using the cursor-up/down buttons.

Apr 25, 2012 | FUJIFILM S2940 Digital Camera

1 Answer

What does the shutter speed set on?


To set the shutter speed, press and hold the mode button and then turn the thumb wheel on the right until M (for fully manual control) or S (for shutter priority auto exposure) appears in the display. Remove your finger from the mode button and the thumb wheel will now adjust just the shutter speed. If you're in manual mode the aperture setting will need a separate adjustment for correct exposure, if you're in shutter priority mode the camera will select the aperture suited to your shutter speed for each exposure.

Please take a moment to rate my answer, or if you wish to know anything else please add a follow-up comment and I shall provide further assistance when I'm next online (I'm in the UK and it's just after midnight right now).

Sep 04, 2010 | Nikon N8008 AF 35mm SLR Camera

1 Answer

How do I change the shutter speed on the Fuji S8000fd


Set the camera to Shutter Priority AE by turning the mode dial to S. Press the +/- button to open the setting screen, then press up/down to select the shutter speed.

You control the shutter speed the same way in Manual mode. You also select different shutter speed/aperture combinations the same way in Program mode.

You can indirectly control the shutter speed in Aperture Priority AE by changing the aperture and letting the camera set the appropriate shutter speed.

May 27, 2010 | Fuji FinePix S8000fd Digital Camera

1 Answer

How to KNOW the light is right 4 an Olympus OM20 Manual camera?


OM-20 was basically a upgraded OM-10 with the manual adapter built in and a number of other refinements.

The viewfinder has LED's to show the shutter speed recommended by the camera's lightmeter for the ISO and aperture selected. It also has an exposure compensation indicator (the +/- symbol) and an indicator for flash ready which doubles up as a post-exposure flash confirmation. There is also the indicator lamp to show manual mode has been selected. OM-10 lacks the manual mode lamp and the +/- indicator.

Like the OM-10, the OM-20 is primarily an aperture priority automatic camera. In this mode you set the ISO film speed, choose which aperture you wish to use (with the ability to use the lens depth of field preview button) and then the camera selects the correct shutter speed. The +/- exposure compensation control allows the user to tell the camera to modify the recommended shutter speed by up to two stops either way.

In manual mode, there is no manual metering. The light meter behaves exactly as it does in aperture priority mode and the viewfinder shows the recommended shutter speed and not the manually selected one. Correct metering is therefore a case of adjusting the aperture first, and then choosing the correct shutter speed indicated in the viewfinder. If the user then decides to select a different shutter speed, then the aperture ring must be adjusted to maintain the correct exposure. For example the aperture is set to f8 and the camera recommends 1/60th of a second. The user decides that a faster shutter speed is required and chooses 1/250th, but the viewfinder remains showing 1/60th. In order to keep the same exposure value the user must open the aperture by two full stops to f4. The camera's light meter will detect the new aperture setting and providing the light on the object is unchanged the viewfinder shutter speed display should now show 1/250th as well to confirm the correct adjustment. Alternatively, the user can choose the shutter speed first by looking at what has been set on the control ring (or by turning the ring to the end of its travel and then counting the clicks from there as all experienced OM users do) and then turning the aperture ring until the shutter speed shown in the viewfinder matches what's been manually set.

It all sounds clumsy and complex but is done far more quickly than I've taken to type this and becomes second nature.

Aperture priority metering is selected on the camera by choosing AUTO on the mode selecter. In this mode the shutter speed ring has no effect and the viewfinder always displays the automatically selected shutter speed.

May 09, 2009 | Olympus OM-2000 35mm SLR Camera

1 Answer

Shutter Speed Adjustments


Use the M (Manual) or S (Shutter Priority) modes. See the manual for details on using these modes and setting shutter, aperture, etc.

Unfortunately, Panasonic's website is not properly linking to the user manual so I can't download the manual to provide you with the exact steps on how to set the shutter in the M or S modes.

Dec 27, 2008 | Panasonic Lumix DMC-FZ50K Digital Camera

1 Answer

Manually setting shutter speed and aperture..


http://web.canon.jp/imaging/eosd/eosdigital4/specifications.html

First off, welcome to the world of photography! Good luck and have fun!!!

Like any slr, you have the option of Manual exposure. I'm not familiar w/ modern Canons (I use Nikon). According to this page, however, you also have aperture priority and shutter priority. I'm pretty sure ALL modern Canons have bracketing modes as well (Use this for HDR).

I couldn't find the 450 manual (I'm assuming Canon's web devs are behind), but I did find the instruction manual for the 400 :

http://gdlp01.c-wss.com/gds/0900000357/EOSDRXTi400DIM-EN.pdf

Should be similar, probably w/o some of the functions. Although you SHOULD have a book w/ your camera ;). Read it thoroughly.

Ok, according to the 400 manual, put your camera into Manual mode, then adjust the regular dial to adjust shutter speed. Then, to adjust aperture, hold in the A/V button while you adjust the same dial.

Like I said, may be a bit different. I think the dial may even be digital buttons rather than analog...

hope this helps!!!

Nov 22, 2008 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

Panasonic DMC FZ30 shutter speed adjustment


set to s -then adjust using command wheel by thumb- 8 secs to 1/2000

Jan 20, 2008 | Panasonic Lumix DMC-FZ30 Digital Camera

3 Answers

Manual Shutter Priority Settings


Try the PROGRAM MODE-SPORTS setting. this will keep the shutter speed reletively high unless there is little light. Or use APERTURE PRIORITY MODE with an f2.0 to f2.8 to keep shutter speed high. If pictures were blurry when it went to AUTO then the light had to be low for the camera to select a low shutter speed. If using flash use forced or auto flash not slow sync. Also set ISO to 400 which is >>>. If inside use a larger external flash as the one on-camera is only good for about 10ft. if more than 10ft. away set focus to manual infinity so you don't have to wait for the camera to focus. Hope this helps.

Sep 13, 2005 | Epson PhotoPC 3100Z Digital Camera

1 Answer

Aperture Priority Mode - an undocumented feature


In addition to the "quirks" of the Landscape and Aperture Priority Modes (neither mode works as documented!)..... The camera also behaves differently in full Manual Mode (it changes the settings, whether you want it to or not to compensate for available light)... At lower Zoom Levels, the camera will adjust the Shutter Speed Only, to try and compensate for available light... For example: with the Camera preset to F5.6 Aperture, and 1/48 sec. shutter speed, the camera will adjust the shutter speed between a range of 1/30 to 1/291 sec, to try and "auto expose" the shot for lower or higher light levels, even though you're in manual mode. At an Aperture Setting of 2.8 and 1/48 of a second, the number of internal steps in shutter speed the camera is willing to take, increases dramatially - for example: shutter speeds up to 1/600 of a second, even though you have the shutter set to 1/48 in manual mode. The camera WILL NOT attempt to adjust the Aperture to compensate for proper exposure in available light (OR WILL IT??).... It depends on your Zoom settings! It won't if your're near to full wide angle, but IT WILL if you are using the Zoom. Once you cross some unknown zoom threshold (it doesn't have to be at full zoom), then the camera begins to change both the Aperture and Shutter speed to compensate for available light, even though you are in "Full Manual", versus Auto Exposure Mode. In Manual Mode, (as in Aperture Priority Mode), the amount of change the camera is willing to make to your settings, appears to be related to a preset number of internal steps, with the number of steps dependent on both Aperture and Zoom Settings, before it gives an EV Warning for Over or Under Exposure conditions.... The type (shutter speed only for wide angle, shutter and aperture for zoom) and amount (number of internal "steps" it takes to increase/decrease shutter speed and increase or decrease aperture), is dependent on the amount of zoom you are using for the current shot.

Sep 13, 2005 | Epson PhotoPC 3000Z Digital Camera

2 Answers

Shutter priority mode?


s I understand it from what I have seen on the Web, the 3000Z can operate in several modes: 1. Fully automatic (camera select both 2. Manual (user sets both aperture and shutter speed). 3. Aperture Priority mode - user sets aperture and camera chooses correct shutter speed to get a good exposure Apparently there is no Shutter Priority mode (user cannot set only the shutter er speed and allow the camera to set the aperature to get a good exposure). This option is available on the Epson 850Z camera and this seems like a silly ommision to make on a "high-end" camera like the 3000Z.

Sep 13, 2005 | Epson PhotoPC 3000Z Digital Camera

Not finding what you are looking for?
Panasonic Lumix DMC-FZ30 Digital Camera Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Cameras Experts

Ekse

Level 3 Expert

13434 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

rajiv6089

Level 1 Expert

10 Answers

Are you a Panasonic Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...