How to install the ventless Zephyr ZSA-M90AS

Contact the manufacturer for parts.

Checkout here for spares :)

http://talkappliance.co.uk/index.php?page=Spares

You have defective windings in the blower motor

Try taking out the bulbs and wiping with a clean dry cloth. Sometimes when bulbs get hot the connection loosens, when you screw them back in do not over tighten.

I am also looking for instructions for PLHV36W6CC.

The fan is on right now but the switch is sliding back and forth loosely.

I just downloaded the manual but that was no help.

If someone has a quick solution, that would be great.

Please email me at [email protected]

I have stuck my hand up and fiddled around but besides just ripping it out, could use some help.

Thanks,

Robert
www.150FastGroup.com

The easiest way to remove the light bulb is to wear a rubber glove, use your palm to press against the bulb, and turn counter-clockwise.

The suction created by the rubber glove should allow you to remove the light bulb easily.

I'm not sure if my Savona is the same one, but on mine, just remove the filter and you can see the base of the light bulb up above the fan base. You can see where the bulb screws into the fixture. Grab the ceramic portion of the bulb, and turn that part. You may want to steady the socket with your other hand because it is very flimsy.

had same problem (w/in a few months)
switch assembly poor design
thay sent a replacement (i put it in)
seen other complants

The company doesn't list such a part. Probably, you have a bad connection in the unit. With the power off, remove the motor housing. Find the connection box and fix up the connections.