I have the 5 element induction cooktop with no

if you have read your manual stainless doesnt work but your cast should --check with a magnet if it doesnt stick pan wont work but notify company or manufacturer customer service of problem[s] since your unit should be under warranty

Ceramic do not work with induction elements because they are not metal.

The induction cooktop will flash "F" when cookware has been removed from the surface; cookware is not present when the unit is turned on; or cookware is not centered on the element.
Position the cookware properly over the center of the cooking surface if the error code "F" flashes. Use only induction cookware and use a bigger pan, as the error code "F" indicates that the pan is too small for the cooking element.

I only saw other models instruction guides in using http://www.google.com to search.

I saw a general youtube video that might be helpful to you.

https://www.youtube.com/watch?v=tkUTIHwDdyc


Salton Induction Cooktop

how to unlock ilve induction cooktop

If Shr (5hr) appears on the display then the cooktop is in showroom mode. To exit showroom mode the cooktop must be locked by pressing and holding the key symbol for 5 seconds. After the cooktop is locked, press and hold the melt touch pad for 5 seconds.

Hi,

The best way to understand how its installed would be to check out its user manual. Since you have not provided the exact model number I was unable too narraw it down to help you with correct manual. But please click on the link bellow to download the appropriate manual:

http://www.hammerwall.com/Manuals/Kenmore/9-36/Lookup/Home%20Appliances/65/

Let us know if you want something else please accept the solution.
Thank You for contacting fixya.com

my induction ceramic cooktop is showing an error code E6 on two of the elements...what is the problem and how do I get it fixed

Hi, I too have had a problem with the dual element on the Kleenmaid CH14. Likewise I was given an Invensys M82314 which as you will know is not configured in the same way. However, I assume that what they call"phase" is the active connection, the neutral is marked and are side by side like the old one, pilot is idicated and is the wire that bridges together with the other switches....you are only left with two...."load1" and "load2" whichever way around I apply those I can only get my inside burner to run. I am baffled !! My old switch operates both burners but keeps cutting in and out.