Looking for the torch assembly for a Clarke WE6523 MG 130 EN wire feed welder. any suggestions?

i put a new motor on the welder an i have 9 to 12 vote coming to the motor but the motor wont run all works but the motor

WITH MY EXPERIENCE ON MINE...YOU MAY HAVE COOKED YOUR TRANSFORMER...THUMBBUSTER

Make sure you are using a high quality brand of wire. Don't use the junk Harbor Freight sells. Use Hobart or Lincoln Electric. Also make sure your wire feed setting isn't too fast.

Go to your nearest Praxair store and ask for a tweco mini gun with a clarke adapter. Tweco accesories are available at all welding stores.

Doesn't sound like much Tech support or parts support through those guys. Time to sell welder and find some good customer service. I personally like Lincoln, they have a great support staff and are awesome helping out schools and providing educational opportunities for students. When buying check on support staff and parts availability before choosing a big ticket item.

Check that your ground clamp is connected to the work piece securely.

replace coil liner

If you are just looking for consumables you can get parts online at
www.welding-direct.com/fistmiggunre.html

Here is the manual in PDF form.

http://www.gts-welco.com/gtsweldsstore/pdf%27s/we6523-6524_manual.pdf

The only things I can think of are:

• The tension on the coil of welding wire is too tight and needs slackening off.
  
• The feed rollers need cleaning and the tension adjusting.

If none of these solutions solve your problem then I can not help you any further.