GE corded phone 29322ge1

Google it. you should be able find it there.

1. Pick up the handset.
2. Press the store button.
3. Press the memory location (0-9) to be erased.
4. Press delete for three seconds until the number in the display is erased.
5. Hang up the handset.

If you need a manual, you can download one at
http://www.home-electronics.net/ge/pc/IB/29267GE1_IB.pdf

The instructions are in the "Memory" section starting on the fourth column of the manual at
http://www.home-electronics.net/USER-GUIDES/29322_DOM_ES_CD_IB.pdf

You may download a copy of the manual at http://www.home-electronics.net/USER-GUIDES/29322_DOM_EN_CD_IB.pdf

Try this link:

http://www.home-electronics.net/USER-GUIDES/29169_DOM_EN_CD_IB.pdf

It's for a different model (2-9169), but I was able to store a number on my 2-9167A from these instructions. You'll have to lift off the plastic cover on the right side to be able to press the "Store" button - but you probably know that. Also, if you actually want to store more than 9 numbers (not counting the A, B & C buttons), then you'll use 01 thru 09 when storing or dialing. Good luck!

Hello there
You can usually get this cord at your local elecronics repair shop
or if you have a thrift store like good will ect ect
or if you have a walmart there they can get one too ok or simply contact the manufacture of the skillet ok?
best regards michael

Here's a link to the manual.
http://www.retrevo.com/support/GE-29322GE1-Telephones-manual/id/512bh030/t/2/

Bill B.
San Antonio

Here are the quick instructions on how to program the phone numbers.

You can also download a copy of the User's Guide from: http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=c96e9c823d0df43989039e5385bef04a&q=GE+29322GE1

Just enter the 4 digit captcha code and you will be able to download the User's Guide.

Please let me know if yo have any questions.

Good Luck!
++++++++

STORING A NUMBER IN MEMORY
To program priority keys:
1. Make sure the telephone is properly installed. Pick up the
handset and listen for the dial tone. If you don’t hear the
dial tone, recheck or repeat the installation steps.
2. Press the SPEAKER button or pick up the handset.
3. Press the store button.
4. Dial the number to be stored.
5. Press the store button again.
6. Press the A, B or C button.
7. Press the SPEAKER button or hang up the handset.
To program frequently called numbers:
1. Press the SPEAKER button or pick up the handset.
2. Press the store button.
3. Dial the number to be stored.
4. Press the store button again.
5. Press one of the 10 memory location buttons 0-9.
6. Press the SPEAKER button or hang up the handset.

I use a ATT calling card I put the 1-800 number and stored it in A then stored the pin# in B it will go throught ,so try to dial it in
manualy
it still will work . But the same works on our phones.Could it be dialing in an Area code?