MY MAKITA DPC6410 PETROL SAW IS RUNNING SMOKEY

Where did the petrol come out from? The tank lid or the muffler or somewhere else?

yes to much oil with the petrol will cause problems i`m afraid the carb is now blocked with oil and will need cleaning out problem is that the carb is micro chip controlled and it will need to be cleaned out at a repair/service center

hope this helps

John

Any two cycle engine oil will sufice, of course you get what you pay for. The ratio is 50:1. Mixture instructions are on the back of the oil container. Thanks and please rate me.

Yes

Don't add oil to the fuel tank, it doesn't mix well in there and you'll almost always use too much oil. Mix your two-cycle oil and petrol in a gas can to get a 50:1 mixture. Read the directions on the two-cycle oil bottle for how much to use and put the oil in the can first so the petrol will mix well with it as you add it to the can.

DPC 6410 http://www.makita.ca/data/upload/tools/DPC6410,%20DPC6411,%20DPC7310,%20DPC7311,%20DPC7320,%20DPC7321,%20DPC8112%20-%20ENG%20&%20FR_owner_English.pdf

Piston and cylinder kit Bailey's about $190.00
http://www.baileysonline.com/itemdetail.asp?item=DM+038130030&catID=395
HTH
Lou
This saw can handle up to 79CCs. we can rebuild him ,bigger, faster, LOL HTH
Lou
Sometimes the cylinder can be salvaged with muratic acid. Piston kits are quite reasonable.

saw just stopped running will not start seems easy to pull though

Come on, it tooks me 20 seconds to find it...Web search is all about keywords. makita dpc 6410 manual leads to the answer. Adding pdf would have been even better...

Mix gasoline and oil = 32 parts gas : 1 part oil