I recently bought a linksys wireless router i've

Your Internet service provider is comcast cable company.
You need to open the setup page of the router and change the Internet connection settings manually.

Connect the computer to the router and modem to the router.
Open the setup page of the router using 192.168.1.1
Click on MAC address clone. Enable it and click save settings.
Power cycle the router and your main computer will be online.
Then you can change the wireless settings manually.

Click Linksys router setup steps

Are you trying to setup router?
You can do it manually without CD.

Connect the modem to the Internet port on Linksys router. The connect one computer to Ethernet port 1 on Linksys router.
Open the setup page of the router and change the settings manually.
See Linksys router setup

The WLAN light on the router will only lit up if there is already a PC or device that is already connected wirelessly.

Reset the both routers in order to go to the factory default setting.
BELKIN (192.168.2.1) normally has no user name or password. So just hit enter.
Linksys (192.168.1.1)
User Name: admin
Pass Word: admin

You can always change the user name and password

Good Luck!

the great thing about the linksys brand is that they are owned by cisco and they will walk you thru the set up no matter when and where you bought that thing and they will spend all the time it takes to make you happy with the product. although the person you speak to will be in "new deli" india so they may need to repeat them selves many times.
have you tried access the router interface page with the computer hook directly to the router NOT wirelessly.???
I think I remember the linksys access page is at 10.10.10.100 in your internet explorer tool bar.

For connecting your mac computer you may need to configure router . What you can do you call call linksys Free Technical support - Direct number is 1800-326-7114

i use linksys wireless router with model number IC: ID:- 3839a-w11s4v4

if i connect it to the ethernet on my computer the green light switch on

and it connect to the local area lane.

but i can not access the web page to confirger the router

Yea, if you have your initial run CD, use that but here is how you do it.

MODEM-ROUTER-COMPUTER
I
Other wireless devices.

You plug the ethernet cable going from the modem into the plug on the router labeled internet. Then give it a cable from ethernet slot 1 to the computer. You should be good 2 go.

hiya krazy327... sorry to hear about your prob.. we,ve all been here at some point!

Can you let me know if it is one specific computer that the problem is with?

If so .. how are you wired to the router "True" wireless or usb/ethernet gateway from the router?

Regards Faggly

Try this page.

http://www.pcmech.com/article/router-basics/

Read and try out.

Good Luck,

Pascal