Universal remote control

0159 0178 0109 0120 0181 0105 0049 0095 0170 0260 0358 0394 0924 0012 0095 0117 0141
These are the setup codes for Toshiba TV, with universal remote control. Just buy one universal remote control, which have these setup codes. Brand isn't a matter. You can get this detail, by the code list, the remote control will have.

http://www.remotes.com/
don't forget to "over night" it ;-)

Here is the user guide for the Motorola DCX3200 in PDF format just in case you need it.

Now then here are some Codes for your Cox Universal remote. I understand you have tried some already but just in case you missed any.

Samsung 0060, 0030, 0178, 0019, 0056, 0032

Also give this a try.

1. Turn on the TV, VCR, DVD, or entertainment center that you want the remote control to control.
   
2. On the remote control, press the appropriate mode button for the device once.
   Television TV
   Stereo amplifier or receiver AUX
   DVD, PVR, VCR DVD
   
3. Press and hold the SETUP button until the selected mode button blinks twice, then release the SETUP button.
   
4. Using the number keys, enter 9 - 9 - 1.
   
   Result: The selected mode button blinks twice.
   
5. Aim the remote control at the device, and then press the POWER button once.
   
6. Press the CH+ (or CH-) button one or more times until the device turns off.
   
   Notes:
   
   In search mode, the remote control sends IR codes from its library to the selected device, starting with the most popular code first.
   If, while pressing the CH+ button, you inadvertently pass the code, press the CH- button one or more times until the TV turns on.
   
7. Press the SETUP button once to lock in the code.
   
   Result: The selected mode button blinks twice.
   
8. To search for codes for other devices, repeat steps 1 through 7.
   

Hope this helps, give me thumbs please!

Please provide the make and model of both the remote and TV. Thanks

go and buy a universal learning remote and you will be able to program all your devices on the remote, works very nice. as far as the lg remote, dont think there is a way where u can program your cable and dvd onto the remote and I have lots of experiences with LG

here is link to program your remote:
http://www.universal-remote.net/philipsmagnavox.html

please rate this

thanks
tom

Hard to say what the code is without knowing the model number of the remote and the brand of TV.

RCA's website has a remote code finder you can use.

Good luck!

Try installing a pair of new alkaline batteries into the remote. If the problem persists, I would suspect the remote is defective and return it to the store for a refund. I have used Philips remotes twice before, and had problems with both of them. I switched to a One-for-All universal remote, and it has been trouble-free, so far.

Here you go.
The remote may not turn the DVD player on and off. Try the codes one by one, with the unit playing a disk. Then try the FF/Rew to see if it is the correct code. Worked for me after all else failed......frustrating huh?

You will have to get the original remote I,m afraid. There are not any universal remotes except the programmable learning type remotes that will work those functions for you. You can get an original replacement remote from here http://www.remotes.com/remotes/servlet/rs?a=gmi&smodel=9P5034C103&brand_pn=MAGNAVOX_9P5034C103&mode=large&uid=11889902397190 Good Luck