Amber light on oki c3300 continues to flash and printer will not print
Here's what the owner's manual has to say:
Error status (Amber, blinking): you cannot continue to use the
printer. Intervention is required to recover from the error. Fatal
errors are irrecoverable and require a service call.
Blinking 1 (2S cycle)
An error has occurred but
printing can continue if you
press the ON LINE or CANCEL
switch.
Blinking 2 (500mS cycle)
An error has occurred. You
need to replace consumables
or remove jammed paper, for
example. The printer then
recovers from the error and
printing becomes possible
again.
Blinking 3 (120mS cycle)
A serious error has occurred.
rebooting or a service call is
required.
The Status Monitor in Windows provides a readable description
of the printer status corresponding to the indications of the
LEDs. In Mac, the printer driver provides status information
once you have sent a document to print. In Windows, if you
have the Status Monitor Preferences set to Pop up on alerts,
this readable message will be presented on screen whenever
an abnormal condition occurs.
There's no further information. Sorry.
Thanks for the suggestion but that didn't do a thing. the error message still comes up immediately upon power up. Nothing moves and none of the other function buttons cause anything to change. the tech dude at Epson said the internal memory chip is probably damaged. This problem was created when I tried to clear the "tray or paper jam" error message from my computer after the printer finished printing the DVD and I didn't take the tray out of the machine right away. Each time I hit the delete button on the computer, I could hear the printer making a noise and then came the error message. As I said earlier, the error went away once after power cycling but now it is back for good. Any other ideas?
I have the same problem I need help please
×