Programming speed dials on 3com nbx 2102 & printing out labels for buttons
I used to be able to go to this website [http://192.168.1.40] to re-program my speed dial buttons on my phone & also to re-print the labels that go alongside the buttons on the phone -- but the website appears to be out of commission. any suggestions? thanks in advance.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The phones aren't on the system. You have to make sure to turn on "Auto Discover Telephones" under the system settings, system configuration tab within "tab to it" (on 5.0 and older software) and System wide settings, auto discovery with newer software. If the phones are plugged into the same network as the phone system, the phones will automatically come up with extensions.
The "hands free" button would need to be pushed on the phone you are calling. This will make the phone answer when an internal call comes in to that extension. Outside calls will still act normally and ring the phone, then go to voicemail. the downside is that it is difficult for fellow employees to leave you a voicemail since your phone answers to intercom on all internal calls when "hands free" is pressed. If all you are talking about is paging through the phones, pressing 621 will page through the phones with a 3 digit dial plan and 6201 on a 4 digit dial plan.