-
Contributor
14 Answers
- Posted on Jun 13, 2008
Re: double lines of print (same words)
You may just need to align the cartridges??
-
Press
Setup
on the top control panel.
-
Press
5
to select
Maintenance
, then
2
to select
Align Print Cartridges
.
or clean them:
-
Make sure the printer is loaded with plain, white paper. Remove any special or colored paper.
-
Press
Setup
on the top control panel.
-
Press
5
to select
Maintenance
, then
1
to select
Clean Print Cartridges
. The procedure takes about a minute and produces a printout, which may be discarded.
You may also have to reset the printer:
Force the HP All-in-One to reinitialize by following the steps below:
-
Turn the unit off by pressing the ON button.
-
Disconnect the power cord.
-
Wait five seconds, then reconnect the power cord.
-
If necessary, turn the unit back on and try printing again.
-
If the unit fails to read the card again, reset the All-in-One. Repeat
Steps 1 – 4, but before plugging the unit back in, press and hold the #
and 6 keys on the HP All-in-One numeric keypad. Continue to hold these
keys down for a few seconds after plugging the unit back in to reset
it. Once the All-in-One reestablishes communication with the computer,
reset the language and country/region.
I have the identical problem with an HP PSC 1110. It occurs systematically with imported files, sporadically with all others. I've tried re-installing the hardware and software, re-calibrating the heads etc. Nothing seems to work! Help!
×