Hello
I am from portugual so sorry for my english :)
I am trying to update my Asus p5s800 vm but it comes with the packard bell bios (107) so i need to update to 207. It asks to save to cd but it doesn't recognize.
Any idea.
Thanks
Updating bios should be done flash bios setup, when your restart your computer after the POST you will see a selection to enter to flash bios manager.
:::Hi!.. Have a nice day..:::
Ok. i think i can guess it a little. eg.
1. Did you update of your BIOS while you are running to your OS (ex. winxp/macOS/Linux), or you boot first yourcomputer into a MSDOS mode?
2. And is your BIOS update is saved into a CD media (Compact Disc), or it was saved into a FD media (Floppy Disk)?
Furthermore regarding from your additional question about "on how you can remove the POST"?
A: POST means (Power On Self Test) you cannot remove it, that is how we will know if our computer (PC) including all the hardware installed and the firmware version of the motherboard (MB) are all properly installed and updated, and testing your CPU clock and the amount of ram you have and the processor speed, temperature is all running OK!.
---By the I'm exactly putting myself right into it and i almost visualize your problem experiencing to your PC. Hope you still give much more time when I was trying to ask you question. We cannot understand the fact if we are not questioning, and its really hard to give a soultion if me to myself are not really getting to that problem deeply.
---I will try my very best to help you with that. Until I can still dig much more info. and status of your problem or we can call it a project.
--tnx,
micro
Good day to you Nelson,
Please do advice me if you still like to converse and i want to know if you still wanted my reply and you still like to hear on what i can solution i can give for you..
***Notify sender -->>micromaster
tnx,
-micro
heres a link for your mb bios:
ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5S800-VM/1023.rar
enjoy
micro
heres a link for your mb bios:
ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5S800-VM/1023.rar
enjoy
micro
sticky on my My Work Queue
test
....
test2
×
dr-afacan, You unfortunatley are not giving me a lot of info to work with. There could be several things to try. First check your cases front panel to Board connections. Then if they are correct I would swap out the power supply with anything compatible to check and see. If that PS is really OK. If you do not have the info for the board go here http://dlsvr03.asus.com/pub/ASUS/mb/socket775/P5S800-VM/e1767_p5s800-vm.pdf
Next step would be to either check the processor, possible BIOS settings or update. Or you unfortunatley just have a dead board. Asus has a good customer RMA system... Just some thoughts.....PCdok
940 views
Usually answered in minutes!
yes, but my issue is that i have instaled the "santiago_bios_170" and need to install the "santiago_bios_0204" and the problem is that it keeps asking for a new cd to backup all information and it has it in :S
Another question. How do remove the POST ? :S
Thanks
this thread was already closed..
×