Error Code for Xerox 5313

it is the code for fuser heat control problem. Usually, the unit has its airflow restricted try moving the unit or cleaning it to see if the problem clears

Here is a list of all the error codes

WorkCentre 7425 style Fault Code List Part

I dont see you listed a model

The error code e7-15 is a copy lamp problem. There is a list of error codes for the Workcentre 100 series at this link.
http://www.partsdrop.com/pages/XD100inf.html

Hi, you can find the error code list for the DocuColor 3535 in the Troubleshooting section of the manual. If you don't have a user manual, you can download a PDF version from Xerox here:
http://download.support.xerox.com/pub/docs/DocuColor_3535/userdocs/any-os/en/3535_User_Guide.pdf

Do you have the feature enablement code. It will be inside one of the booklets you received when the machine was delivered, it you purchased the feature from Xerox. The book that has the code has on page 5 I believe, step by step instructions to add the enablement code.

If you can send an email to [email protected] I can send you a list of all the error codes. Unfortunately, there are far too many to list in the space avaialble here.

Replace document feeder. 004k07270 $390.00

the error code is "printhead stuck in the tilted position or not tilting properly over the CAM, due to problems with the process motor gearbox" the 6375 is your print count, are you under warranty still by xerox?
-Carl, please let me know if this helps.

13,323 is a Printhead Reservoir Temperature Faults . One of 3 things. In order of likeliness.
1. Print head has failed
2. Cable to the back of the print head is loose.
3. Electronics module has failed..

What that code means is that once the ink melts and flowes into the print head, the print head is not maintaining the proper temperature.

Call Xerox, they have a problem with this code and the ink loader needs to be updated.
It has to do with the yellow sicks loading properly