Can't send a fax via my call-center

hi

find link for toshiba e-studio reset support

https://www.techwalla.com/articles/how-to-reset-a-toshiba-copier

Hi
The error means that the thermistor or heater abnormality at power-ON.
i think you should contact the provider.
Error Codes Toshiba Studio 167 Code C41

hi

find link for Toshiba

https://business.toshiba.com/downloads/KB/f1Ulds/8356/eb3-NetFaxGuide-v04.pdf

Software & driver can be download via business.toshiba.com

It means there is no dial tone on the fax line, is the rj11 plugged in properly [ (Line) on the copier, not he one labeled as (TEL) ], is the telephone patch defective, or you have an active phone on the wall jack, (test it it with an ordinary phone), or the receiving party is busy, try later, or try a different nunber.

http://copiers.toshiba.com/downloads/KB/file_uploads/9951/TOSHIBA_e-ST205Srs.dmg.gz

if connect to usb cable, then u need to install usb driver b4 installing printer driver

Turn off DCHP after setting the IP address