Question about RCA F27242GY 27" TV

24'' f27242gy only channel 3 comes on.. will not work with a remote .. menu button won't respond. is there a reset button on this ?.. anyone can help would be appreciated.

1 Answer

Jaime Hernandez

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.
Master
2,337 Answers

It looks like you will need to autoprogram the rest of the channels but do this you will need to have the TV connected to cable to store more than channel 3.
Good Luck.

Posted on Jan 16, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Bush 24 inch tv/dvd combi screen went blank as if it's on standby. won't respond to remote control. one week old. is it seroius?

try switching on tv point remote at the tv pressing the menu/exit button and holding for 10/20 seconds hope this works for you

Oct 07, 2012 | Bush Industries IDLCD26TV16HD LCD TV

1 Answer

Will a universal remote work on the RCA F27242GY 1999 TV?

If you must purchase a universal remote, please buy an RCA universal remote with menu and input buttons. You will be glad you did! Thanks for asking and show a few hands of support!

Jan 24, 2011 | RCA F27242GY 27" TV

2 Answers

How do i find the factory reset?

This model has what is called the "option" menu which is a hard reset of the set. It returns the set to the condition it was when new in the box---on air band on channel 3.

What is reason you want to do the reset? I can tell you how if a good reason.

If this helped you rate this solution as very helpful as I do this here for free and respond with a comment here.

SD TECH

Sep 03, 2010 | Mitsubishi WS-55311 55" Rear Projection...

3 Answers

Samsung LE32R74BDX 32 in......

just spoke to Samsung support and it turns out that the freeview tuner had froze and needed resetting. To do this put TV on standby and then push in series these buttons on the remote: 'info, menu, mute, power' the TV will then turn itself on and display a menu. Press the 'down arrow' untill you've highlighted option 12 - 'reset' and then press the 'right arrow' to enter the option. TV will turn off and when you turn back on it will start in 'plug & play' mode as if new. Set the time and country options and then it will perform a complete scan. I've just retuned mine and all back to normal. Hoorah!!!! :-)

Oct 03, 2009 | Samsung LE32R74BDX 32 in. HD-Ready LCD...

2 Answers

My Sony Trinitron TV does not respond to remote control commands

the tv wont come on the standy timer light is on

Jan 02, 2009 | Sony FD Trinitron WEGA KV-27HS420 27" TV

1 Answer

Tv is on but wont play

Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:

NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.

1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.
Give the brand name and the model number..

hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Aug 25, 2008 | Televison & Video

1 Answer

My remote is not responding to the tv even i have changed the new baterry

1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE:

Aug 21, 2008 | Samsung BN59-00599A Remote Control

1 Answer

Menu not working.........

1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE:

Aug 21, 2008 | Panasonic TC-26LX60 26 in. LCD Television

1 Answer

Picture gets hung

1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE:

Aug 17, 2008 | Fujitsu P42VHA30WS Television

1 Answer

Samsung lcd tv

1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE:

Aug 07, 2008 | Samsung LN-S2651D 26 in. LCD Television