WHAT THIS ERROR C630 IN KYOCERA KM1510?

press10871087 after press 163 reast

cheak memory board

add paper repair / check the switch if work or not

Code C0630

Contents: DMA problem
• DMA transmission of compressed,
decompressed, rotated, relocated or
blanked-out image data does not
complete within the specified period
of time.

Causes: Defective main board

Check procedures/corrective measures: Replace the main board and check for correct operation.

C630 Open fuser thermistor

check the fuser unit thermistor and replace it......

this code means the fuser unit error.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

it means that toner cannot enter the developing section of the copier, all you have to do is remove the developing unit, then pour it with enough toner, the problem will be solve.

Hello sir; C630 require reset, procedure as follow;
1, press these key by order and keep holding down.
2 these keys are "stop/reset", "start", "left copy density"
3, press "stop/reset" key again.
4, enter 163, press start.
5, window will show out "CLE"
6, press start to clear.
7, press "stop/reset"key and 001 to exit.

this is a fuser error meaning that the fuser has overheated. In most cases the thermal fuse or thermostat blows and will need replacing. especially if you get the 630 code, and switch the machine of and back on and get a 610 code.