Question about Nokia 7250i

1 Answer

Adjust ringer length Nokia 7250

My phone only rings 4 times before clicking on to answer phone, can you help adjust the ringer length?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,102 Answers

Hi the only way you can make the phone ring longer is to goto settings scroll down to call select call then select call divert then select cancel all diverts after you have dont this then select divert if busy turn this on then divert if out of reach turn this on the select divert if not available now leave them like that then when your phone is switched on it wont goto answer unless your on phone to someone else or you hang up on someone.
With the settings like that it will goto answer phone if phone is off or if you have no signal or if you are on phone to someone else but now your phone will ring for aslong as someone rings you for.
Let me know if you need further assistance

Posted on Jan 16, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turning the ringer on my phone. uniden 6.0


Without the model number of your Uniden phone, I don't know which silencing feature you are dealing with.

Some Uniden handsets have a Silent Mode. To toggle this on and off, press and hold the # key (below 9) for 5+ seconds when the phone isn't in use. When the silent mode is enabled, the handset will ask for a length of time for the 'no-ring' option. If no key is pressed, then the Silent Mode will continue until the # key is held again.

Other Uniden phones have Do Not Disturb. The button to enable/disable this will be on the cordless phone base. The answering system will automatically turn on and none of the handsets will ring when this feature is enabled.

You can also set the ringer volume to zero. Depending on the phone, you can reset this by pressing the volume up/down buttons or going through the menu. Look for the Ringer Volume in the same section of the menu as the Ring Tone options.

If you need additional information, please add a comment with the model of your phone. I hope this helps.

Cindy Wells

Jun 13, 2016 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

We have 4 RCA 25425 phones in our office. When someone calls, all phones ring. We only want main line to ring.


Page 15 of the manual shows how to turn individual phone ringers off using the "Ringer tone" setting option. RCA 25425RE1 User Manual Page 15 Hope this helps

Jan 10, 2014 | RCA 25425 / 25425RE1 4 Line Corded...

1 Answer

I would like to adjust the length of time the phone rings for before he fax machine answers


You can do so two ways. 1. Open XEROX companion, click setup, technicals, 10nth parameter (rings) 2. press menu, setup, technicals, rings (12th parameter) Cheers. Nick

May 26, 2011 | Xerox Phaser 3100MFP/S Laser Printer

1 Answer

Our digital answering feature now picks up after 2 rings it has always rang 4 times. Is there a way to adjust back to 4 rings?


on answering machine you need to do the following:
1. Press menu 3 times
2. Press repeat/rew or skip/ff until 4 is displayed.
3. Press set/ringer to store it for 4 rings.

Your done! set to 4 rings!!!!!

May 15, 2010 | Uniden Cordless Phone exai398i

1 Answer

Our digital answering feature now picks up after 2 rings, it has always rang 4 times. Is there a way to adjust back to 4 rings?


click menu 3 times. click either repeat/rew or skip/ff to set to either 2 for 2 rings or 4 for 4 rings or 6 for 6 rings or h5 for toll saver THEN press set/ringer to save your change. Answering machine will answer after 4 rings if you wanted the 4 & saved by pressing set/ringer. Thats all there is to it.

Mar 29, 2010 | Uniden Cordless Phone exai398i

1 Answer

Ow doyou set it to ring four times before the


Press menu 3 times. Then press either repeat/rew or skip/ff to get to 4. Press set/ringer to store your changes.

That is all it takes to get your 4 ring then answer maching picks up.

Nov 20, 2009 | Uniden Cordless Phone exai398i

2 Answers

Ringer off displayed on base. How do I turn it back on? Just called myself from my cell phone and phone actually did ring.


Thanks for giving me the opportunity to help with your problem.

The "ringer off' message on the base display is referring to the ringer on the "base" unit not the phone ringers. Your phone handset(s) will still ring even when the base ringer turned off.

To turn the ringer on the base back on press and hold push the ^ symbol on the base until it beeps two times, To turn the base ringer off, press and hold the v symbol until the unit beeps.

If my information has proven to be of help, please give me good rating. Thanks for using FixYa!

Jan 27, 2009 | Panasonic KX-TG5632 Phone

1 Answer

Ringer length


Google (Southwestern Bell)(GH-5812)(manual) without parens to get instructions.

Feb 27, 2018 | Southwestern Bell GH-5812 Cordless Phone

Not finding what you are looking for?
Nokia 7250i Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Cell Phones Experts

jonathan mariano
jonathan mariano

Level 2 Expert

344 Answers

Ekse

Level 3 Expert

13434 Answers

Zaid Anarwala
Zaid Anarwala

Level 3 Expert

457 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...