Lexmark x6170 All Inn One

Try to re-insert the color cartridge into the printer and make sure it is properly seated in the cartridge carrier.
If that doesn't help, try to clean the print nozzles. Please follow the steps below:
1. Press Copy. 2. Press Options until Maintenance appears on the display. 3. Press the right arrow until Clean Cartridges appears on the display. 4. Press Select. A nozzle page prints, forcing ink through the nozzles to clean the clogged nozzles. 5. Print your document again to verify that your print quality has improved.

Print quality issues could be due to dirty or clogged print cartridge nozzles. Please follow the steps below to improve the print quality:
On the printer operator panel:

1. Press Copy.
2. Press Options until Maintenance appears on the display.
3. Press the right arrow until Clean Cartridges appears on the display.
4. Press Select. A nozzle page prints, forcing ink through the nozzles to clean the clogged nozzles.
5. Print your document again to verify that your print quality has improved.

Using the Lexmark Solution Center:

1. Click Start > Programs > Lexmark X6100 Series > Lexmark X6100 Series All-In-One Center.
2. From the Maintenance tab, click Clean to fix horizontal streaks.
3. Click Print. A nozzle page prints, forcing ink through the nozzles to clean the clogged nozzles.
4. Print your document again to verify that your print quality has improved.

If the problem continues, try to insert a different known working cartrdidge or better yet replace it with a new genuine Lexmark cartridge.
Should the problem continue, please contact Lexmark Technical Support Center for additional assistance.

Good day! Try to follow these steps on how to do duplex printing using the Print Properties settings. With a document open, click File, Print. In the Print dialog, click Properties (or Preferences, or Options, or Setup) button. The Print Properties screen appears. You'll see three main menus: Quality/Copies, Paper Setup and Print Layout. In Print Layout, select Duplexing to print on both sides of the paper. Hope this helps.

Go to that document and clink on properties. You will find that the right hand margin is set too far left to accommodate an 8x11 document.

Manualfox.com is a personal Document Search Service for electronic user and service manuals. They help you to save time and money by finding your needed product information.

If the documents you are scanning are black and white, make sure you are selecting that in the scanner dialogue box. If you need to keep gradiants, but don't need color, try selecting grayscale. If you are adjusting your DPI (dots per inch) to the maximum (300), try using something lower (recommend 150). Lastly, check the settings in the software you use to create PDFs to ensure they are the same as what you use at the office.

Service manual:

http://www.nodevice.com/manual/newmans/lexmark/4408smpdf/get21352.html
Please remember to rate all users who assist you for free :)




I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

check the properties and page settings before you print you may find your page settings are incorrect to what you want. Set to all pages, make sure print colour documents black is unckecked, make sure no other settings are telling it to print other than what you want. Post back if no good.

Sure it is. It is always easier to go through the different steps with the software provided by the company, here by Lexmark.

Hi,

You can download here from Lexmark.

http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Lexmark+X6170

Just pick your opearating system.