Question about Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint WF860 Cycle does not end

My Hotpoint WF860 washing machine is not finishing its cycle. The machine goes on for so long but never spins or rinses, it gets to 1 minute remaining on the display and then keeps going just turning the drum, not spinning and never getting past 1 min remaining.

the only fix I have sorted to get my washing done (but not really very clean) is to stop it when it gets to 1 minute, let it do its 2minute draining cycle then put it onto a spin and rise, it works then but the clothes are not really clean they are just rinsed through.

Can anyone tell me if they know what the problem is and how to fix it.

IT has been suggested it might be the carbon brushes but I am not a all convinced he knew what he was talking about (not an engineer just a neighbour)

Any help would be much appreciated

Posted by Noggsie on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Could b presure system blocked up find this on side of filter long plastic *****

Posted on Nov 29, 2009

  • patrick gormally Feb 28, 2012

    was this the solution to the problem

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The washing machine isn't completing a cycle. It won't spin or drain or complete a sports wash, but ends the cycle after 2 minutes. The washing machine is less than a month old and is definitely not...


Your machine is still under guarantee. Contact the dealer who sold you the machine and make it his problem. Trying to do anything to the machine will void your guarantee.

Jan 25, 2011 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

I have a Hotpoint Ultima 1200 - WM75. At the end


Check the filter and the actual pump itself for blockage.unless you have already done so, also pump itself could be faulty.

Mar 29, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

My hotpoint wf860 child lock button pressed by accident ,now no buttons work want to give fast spin,then wash next load.


Try holding down 'options' & 'select' together the light changes OR 'dry' & 'spin' OR hold down 'end of cycle'. Works for other machines, tell me what did it.

Feb 26, 2009 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

Hotpoint ultima 840


hold child lock button down for 2 seconds you will then hear a beep done.

Jun 10, 2008 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint WD860 problem


washer wf860 showing f07 error. why

Mar 04, 2008 | Hotpoint Washing Machines

1 Answer

Hotpoint wf860


the applionce is in demmo mode and running a test cycle so you need to cancle the cycle first by holding the start reset button until all the screen iluminates(88:88) now you need to disable the demo mode by holding the start cancle and the on off buttons together until you see D OFF in some cases you may need to hold the button to the top left of the screen and the start and on off buttons but this will sort it

Feb 17, 2008 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Wont finish washing cycle


suspect not draining. if not then problem could be the filter. at back, remove the small panel at the bottom. you will see a hose from the bottom of the tub to the pump. remove this hose at the tub end and the filter is inside.be carefull, if machine has not drained, a lot of water will come out. disconnect from mains of course

Jun 13, 2007 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

Hotpoint Ultima WF860 stops every time with 1 second to go


This problem is caused by the heating element not working.The machine won`t spin & finish because the machine knows it hasn`t heated the water during the wash programe but clock will still count down.this is what we were told by a hotpoint engineer.the callout charge is £89.98 from hotpoint this includes parts & labour. 27/7/07

Nov 05, 2006 | Hotpoint Ultima WF860 Front Load Washer

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

492 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

gbob59

Level 3 Expert

3063 Answers

Eric Taylor

Level 3 Expert

590 Answers

Richard C Cohen
Richard C Cohen

Level 2 Expert

171 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...