Camera goes into erro mode at start up - Bushnell Trail Sentry 11-9200 Digital Camera

• turn off the camera
• remove the memory card
• turn the write mode of the memory card to on position

This video goes over the problem you are having.

Hello try to download a user manual:

http://www.kyoceradocumentsolutions.eu/index/service/dlc.false.driver.FS1118MFP._.EN.html#

Or contact your local dealer.

Try these procedures.

Try the procedures in this tip.

You did not say your camera is 6 MP or 4 MP. But if it is 6 MP then do the followings.

When an error code appears on the LCD, turn the Mode dial off and then turn it on.

If the error code appears again:
Step-by-Step Solutions and Repair tool is available, use the tool to see if you can fix the problem yourself.

Good Luck.

everytime i turn it on an error appeared ''Image Management File Erro '' :(

This has happened to me a couple of times now. Press cancel to get out of the mode and then press both on/off and start/cancel at the same time. When i did this the screen displayed 'Doff' and then i was able to select the wash programme and it worked.

I don't have a solution we bought another camera. but our 710 is not very old and would like to get thisone fixed but will not pay $100 just to get it checked

Try these procedures.